|
Information |
|
wanted two decent wheel rims for our s60 d5Views : 487 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 14th, 2011, 11:49 | #1 |
Premier Member
Last Online: May 4th, 2020 10:57
Join Date: Nov 2009
Location: ibstock liectershire
|
wanted two decent wheel rims for our s60 d5
anybody out there with a couple of decent alloys for our s60,? we have two rear ones that are very scabby,
__________________
lynda & ron. I AM NOT PERFECT......BUT I AM FROM YORKSHIRE AND THATS AS CLOSE AS YOUR GONNA GET!!!!VOLVO VEHICLES CLUB MEMBER landrover discovery 2.5 tdi 50th anniversary limited edition. elldis odessey 4 berth tin tent. |
Jul 14th, 2011, 12:35 | #2 |
Two wheeled lycra lout
|
How about refurbishing the ones you've got? Thor's are nice rims
I've used the Wheel Specialist twice now for the Orestes on the barge and would recommend them. http://www.thewheelspecialist.co.uk Branches in Nottingham or Burton are probably your closest. Mine were done in Manchester and they could offer a one day turn round if needed. Get there early in the morning, leave the car, go walkabout, return at 4pm, all done. All finishes are togh powdercoat not wet spray that can peel (been there, done that).
__________________
Can we share the road please. Yes, I am insured on both 2 and 4 wheels. Not a motorist, not a cyclist, but a road user. 54 V70 D5 SE (163, EUIII) MTE, Eibach, Powerflex, IPD arb's, TWR FMIC, Ferrita cat-back. |
Jul 14th, 2011, 12:43 | #3 |
Premier Member
Last Online: May 4th, 2020 10:57
Join Date: Nov 2009
Location: ibstock liectershire
|
thanks robbie , your a gent,the only problem i have is that i can't do without the car due to lynda being severly disabled but if all else fails i will give them a go, once again many thanks ron.
__________________
lynda & ron. I AM NOT PERFECT......BUT I AM FROM YORKSHIRE AND THATS AS CLOSE AS YOUR GONNA GET!!!!VOLVO VEHICLES CLUB MEMBER landrover discovery 2.5 tdi 50th anniversary limited edition. elldis odessey 4 berth tin tent. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|