X40 stuff for sale

[fat tony]

Some more chrome handles of mine on Ebay:

http://www.ebay.co.uk/itm/Volvo-S40-...item2a29802f38

Also got the following parts for sale

Genuine Volvo H7 black bezels with chrome rings, passenger side has a couple of the mounting clips missing, therefore, i'm unsure of price, if you're interested, PM me and we'll discuss it




Chrome dial rings, just the grey piece with the rings attached, no actual dials and no clear plastic - £20 including delivery. Easy to fit, did mine while changing the steering wheel, took 5 mins



S40 High Performance Speaker set with amp. Don't see many of these for sale, they are ridiculously expensive from Volvo (£480 plus VAT fo
rt the speakers!!!)
The amp comes with the multiplug and a few inches of wire attached. I don't currently have the headunit to amp lead, but will have it in my possesion by the end of the week.




Not sure what they're worth so make me an offer

[Slackey]

Where does that Amp fit Tony? If it is the one from under the passenger seat what other wiring is required?

[fat tony]

Originally Posted by Slackey

Where does that Amp fit Tony? If it is the one from under the passenger seat what other wiring is required?

It fits it the drivers side quarter panel. I've just had a look at the wiring, it looks easy enough to do, just time consuming running the cables.

There's 11 wires to the multiplug, 8 of them are speaker wires, 1 is earth, 1 is power, i'm guessing that the other is the remote switch from the headunit.
There is also the stereo to amplead which is a straight forward plug and play job

I'll test the wiring on the amp in mine and get a proper idea of it

[fat tony]

Also got a genuine Volvo single DIN cubby hole, with rubber mat inside it, good condition, £10 including postage

[dcw]

Hi Tony

Interested in the chrome dial rings please.

£20 all in sounds a fair price - could you PM me about payment and I'll sort things out with you?

Thanks

David

[fat tony]

Chrome dial rings now sold

[Samwell]

How much would you be looking for for the bezels? I havent got my car yet, but if all goes will, Ill have it this saturday and will need these... or at least, want them. Missing the clips, can you see it difficult fitting?? Would they glue into place ok?

[fat tony]

To be honest, it was quite secure on the headlight i removed it from.
If they are the same as on my headlights, i might strip mine out and fit the dodgy one to mine so i can sell a decent pair

I'll have a look tomorrow and get back to you

[Samwell]

Wow, thats very good of you, thanks! Are they difficult to fit? Im hoping I get the car then I will know for sure!

[Antz]

Dead simple. Just remove the headlight, remove the metal clips holding the lense to the backing then carefully pull the bezel from the cover. Its only clipped in and will come off pretty easily. Then you just clip the new ones in, lense on, clips back on, refit light and job done.