Gear Knob

[Davebo]

My gear knob on my 940 with overdrive is falling apart. The overdrive switch is still working. Is it just a case of pulling the rubber knob up and off and sliding a replacement on, or is more involved???????

[adamsky01]

Originally Posted by Davebo

My gear knob on my 940 with overdrive is falling apart. The overdrive switch is still working. Is it just a case of pulling the rubber knob up and off and sliding a replacement on, or is more involved???????

ok i take its a auto yes verry simple i mounted the over drive switch on my stering weel with no hasle at all but u cold mount it prety much any were as for the stick ok pull of the old won or cut it of under neath there should a plastic sqwere tube pull that of go to b&q buy some rad snaps in crome go to auto part center buy a new knob <no pun intented> go home snap the rad snap on put the knob over the top making sure the knob goes over the rad snap tigten up u are done

[Davebo]

I'm afraid its a manual, not auto. Its very loose and could pull it off, but then do I have to pay volvo mega bucks for a new one. i like the idea of fitting it to the steering wheel though.

[adamsky01]

no difrence m8 u can do it to a manual just folow what i said before
one difrence beeing rember to buy a knob that has lift change for reverse if u have that fi ur near m4 coridor i am wiling to sort it for u no charge

[Davebo]

Thanks for the help, I live in Doncaster though.

[adamsky01]

Originally Posted by Davebo

Thanks for the help, I live in Doncaster though.

are u coming to the meet in stoke i am can sort it there