|
Information |
|
'77 240 Choke CableViews : 721 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 17th, 2018, 10:41 | #1 |
Junior Member
Last Online: Apr 29th, 2022 20:29
Join Date: Jun 2013
Location: Nuneaton
|
'77 240 Choke Cable
If any one has a choke cable or know where i could get one from please let me know. Its for a 77 244 with Stromberg CD175, im realy struggling to get hold of one atm. Cheers
|
Dec 17th, 2018, 10:50 | #2 |
Experienced Member
Last Online: Today 10:47
Join Date: Jun 2007
Location: L/H side
|
Have you tried the volvo dealer?
__________________
My comments are only based on my opinions and vast experience . |
Dec 17th, 2018, 21:53 | #3 |
Junior Member
Last Online: Apr 29th, 2022 20:29
Join Date: Jun 2013
Location: Nuneaton
|
yeh but they only sell the outer and inner separately to the handle. i was looking for an assembly preferably
|
Dec 17th, 2018, 22:11 | #4 |
Experienced Member
Last Online: Today 10:47
Join Date: Jun 2007
Location: L/H side
|
don't forget the white grommet where it goes through the bulkhead it secures the outer cable solid . You could get them both and slide them together no doubt ..
__________________
My comments are only based on my opinions and vast experience . |
Dec 18th, 2018, 14:41 | #5 |
Junior Member
Last Online: Apr 29th, 2022 20:29
Join Date: Jun 2013
Location: Nuneaton
|
i still have the original that came out with it but was going to replace it anway. I think im gona have to get the inner and outer from volvo at this rate.
i dont realy want to cut the copper to remove the outer cable but theres no other way i can see. the inner cable looks to pushed into the handle then punched to make a flat spot to hold it in place. not sure how to remove that either. |
Dec 18th, 2018, 14:51 | #6 | |
Experienced Member
Last Online: Today 10:47
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
Dec 19th, 2018, 09:26 | #7 | |
Junior Member
Last Online: Apr 29th, 2022 20:29
Join Date: Jun 2013
Location: Nuneaton
|
Quote:
the reason im replacing it it that the inner cable snapped at the carb end and wont reach any more. also about two to three inches the rubber on the outer has stripped away at that end aswell so was gona replace that just to tidy things up. this is why i was trying to find a full assembly instead as its much easier Last edited by joecowan27; Dec 19th, 2018 at 09:31. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|