|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
bodystylingViews : 1214 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 13th, 2002, 23:16 | #1 |
redbollock guru
Last Online: Jun 30th, 2016 23:54
Join Date: Jan 1970
Location: lincoln
|
bodystyling
Ok so the 480 isnt to everybodies taste , so here is some for the 850
pre production photos http://homepage.ntlworld.com/mj.slater/8505front.JPG
__________________
www.dbsmotorsport.co.uk |
Jun 14th, 2002, 13:16 | #2 |
Guest
Location:
|
RE: bodystyling
Dave,
Will it fit a R bumper (bigger bottom lip & fog lamps) and how much ?? Do you need a wicked red demonstrater 855 ??? ;) Jim, '96 855-R (The Flying Wardrobe) |
Jun 14th, 2002, 18:20 | #3 |
VOC Member
Last Online: Mar 7th, 2024 14:11
Join Date: Dec 2002
Location: Stafford
|
RE: bodystyling
Hi ya Jim,
Looking at the pic i have seen, and also on another site he could produce it with the fog light holes. The original bumper comes in two pieces the grey trim which cost about £250 as i have replaced this unfortunately due to some idiot hitting me when parked. The lower half, the t5r bit is about £130 quid unpainted with the holes pre-drilled and just screw attaches. So therefore looking at the pics it should be a straight replacement. If like the early models you may have to cut the holes out yourself, as another dealer i used made a hash job when mine was delivered without. So causing me to dip into my pocket again a few years ago and replace it. mark.
__________________
Polishing Mark VOC 850 class winner 1998 to 2007 Rejoined 2022 |
Jun 14th, 2002, 22:50 | #4 |
redbollock guru
Last Online: Jun 30th, 2016 23:54
Join Date: Jan 1970
Location: lincoln
|
RE: bodystyling
The spoiler is made to fit std front not an 'R' . Although you could purchase the lower std half and bolt the spoiler , not much point if you can get an r version , which apparently you cant because they are made in limited numbers . Thats only speculation though . I am planning to produce replica fronts , well im fiddling with it at the moment . There is nothing stopping you getting a std bumper and doing it - your r version will be nicely tucked up in the shed . s/h fronts are available - mine cost £40
__________________
www.dbsmotorsport.co.uk |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|