|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
What I did today thread...Views : 329251 Replies : 3026Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 17th, 2024, 18:14 | #3021 |
Junior Member
Last Online: May 3rd, 2024 14:54
Join Date: Dec 2023
Location: Aylesbury
|
__________________
'05 S60 D5 Sport Auto |
The Following User Says Thank You to olliecampbell For This Useful Post: |
May 2nd, 2024, 09:40 | #3022 |
Senior Member
Last Online: Today 07:17
Join Date: Dec 2020
Location: London
|
Chassis Setting Service Required
Over the weekend the "Chassis Setting Service Required" message appeared on my V70 R. This seemed to force the car to fall back to rock hard "performance" mode on the 4C suspension. Not ideal for potholed London roads.
Out came the VIDA laptop. One missing signal from a sensor. Wheel off and quick check of cables showed a very worn through cable. After a quick amazon shop for cable and self-soldering wire connectors and some cable trimming it's all good again now. These things are ace. Never seen them before. A good £20 repair rather than then 300 EUR Skandix wanted for a new sensor.
__________________
2004 V70 R - Flash Green over Gobi, Geartronic, 182k miles. |
The Following User Says Thank You to Nick6262 For This Useful Post: |
May 2nd, 2024, 15:12 | #3023 |
Premier Member
Last Online: Today 12:38
Join Date: Apr 2011
Location: Belfast
|
Replaced both front calipers and changed the brake fluid
__________________
1996 850 T5 - Sold 2003 S40 1.9d - Sold 2004 S60 D5 |
May 2nd, 2024, 20:39 | #3024 |
Premier Member
Last Online: May 4th, 2024 13:46
Join Date: Aug 2013
Location: Emsworth,hants
|
Yes Solder sleeves are good, i see all of the youtubers telling everyone how good these new inventions are, they are not new i have used them for the last 30+ years in MOD wiring work, they were first made by raychem,
Good work, Dave |
May 3rd, 2024, 17:54 | #3025 |
Junior Member
Last Online: Yesterday 00:47
Join Date: Sep 2012
Location: Guildford
|
(long returning member, years ago I had a V70 2.5 audi engined one and a XC60) so now gathering service bits for my 'new' 2002 V70 D5 (previous owner had since 2011)
It's only done 15K miles in the last 10 years! (less than 3K in the last 5) so feeling my way around it, figuring a Euro 3 diesel should be at least less effected by such low usage than other cars/engines but we'll see. Too local and cheap to pass up and wanted another estate so I'm back here searching for info/advice/how to's. Thanks in advance to the forum stalwarts/unsung heroes, already watched a few D5 cambelt etc videos that I think are from posters on here, so appreciate it. Last edited by Scootersp; May 3rd, 2024 at 17:57. |
May 5th, 2024, 12:31 | #3026 |
Senior Member
Last Online: May 7th, 2024 21:55
Join Date: Feb 2021
Location: Beers
|
Timing belt replaced,new shocks and new parkingbrake shoes.
|
May 7th, 2024, 15:35 | #3027 |
Senior Member
Last Online: Today 07:17
Join Date: Dec 2020
Location: London
|
I am always surprised when a Onewheel post hasn't got head lights in it ;-) Had a panic at the weekend that my acceleration sensor fix had broken something else as I has "engine system service required" and "brake assist service required" warnings appear. On getting home and hooking up VIDA I discovered a "ecm-9400 brake pedal sensor - signal too high" code stored. Unplugging the sensor, giving it a wiggle and plugging it back in seems to have resolved the issue. I did make a very school boy error a couple of weeks ago which might have caused the issue. I topped up the oil and forgot to replace the filler cap so the brake booster and other bits all got a light misting of engine oil.
__________________
2004 V70 R - Flash Green over Gobi, Geartronic, 182k miles. |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|