|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
cruise control randomly goes offViews : 451 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 6th, 2024, 22:38 | #1 |
New Member
Last Online: Jan 6th, 2024 22:38
Join Date: Sep 2015
Location: Newark-On-Trent
|
cruise control randomly goes off
Hi All
I have a 57 (2008) XC 90 auto trans cruise control normally works fine, occasionally it will turn its self off and not turn back on. To be clear, the word cruise dissapears from the dash and when pressing the button wont come back. This is rectified by turning the engine off and on again. Car otherwise behaves normally. what could cause this, i have vxdiag no codes logged |
Jan 7th, 2024, 09:27 | #2 |
Bungling Amateur
Last Online: Today 07:32
Join Date: Aug 2014
Location: Beverley, East Yorks
|
Check operation of brake pedal sensor (and clutch if manual).
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
Jan 7th, 2024, 13:24 | #3 |
Master Member
Last Online: May 2nd, 2024 06:43
Join Date: Jan 2016
Location: LEICESTERSHIRE
|
This happened with my 54 plate xc90 turned out to be transmission fault, New valve body sorted it.
__________________
XC 90 SE LUX 2014. |
Jan 7th, 2024, 17:24 | #4 |
Bungling Amateur
Last Online: Today 07:32
Join Date: Aug 2014
Location: Beverley, East Yorks
|
If you get any issues with torque converter lockup - it disables cruise control.
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
Jan 9th, 2024, 21:29 | #5 |
Premier Member
|
|
Jan 10th, 2024, 02:18 | #6 |
Member
Last Online: Yesterday 21:22
Join Date: Dec 2021
Location: Newark
|
My only experience with this may not be relevant. My 2.0d ghia x mondeo manual would cut the cruise as the clutch was slipping. So if going up a steep hill the car would apply throttle then the clutch would slip slightly and turn cruise off. Good luck finding the problem.
|
Jan 10th, 2024, 11:50 | #7 | |
New Member
Last Online: Jan 10th, 2024 14:21
Join Date: Jan 2024
Location: Gateshead Tyne & Wear
|
Alanwilson
Quote:
Last edited by Alanwilson; Jan 10th, 2024 at 11:52. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|