|
Information |
|
Steering wheel puller - 120 seriesViews : 511 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 11th, 2021, 19:57 | #1 |
Master Member
Last Online: Mar 24th, 2024 21:35
Join Date: Aug 2006
Location: Peterborough
|
Steering wheel puller - 120 series
Hallo, would anyone have a steering wheel puller, please?
No idea on the going rate but I would like to fit the Nardi I finally had splined.
__________________
Sinderland Road through Dunham Town - The interesting way home. |
Aug 12th, 2021, 20:27 | #2 |
VOC member
Last Online: Today 10:03
Join Date: Jan 2008
Location: Sheffield
|
Puller
Hi
I made a puller to remove my steering wheel, looking at your other post I would expect a 66 car to have the early wheel/horn ring. Mine is the later item with the butterfly shaped horn switch. Its a simple puller made from sturdy flat bar with 2 x holes drilled at 34/35 mm centres. There are 2 bolts to pull the wheel included. Take a look at yours and if you think it will work I will post it. All I ask is that it is returned. Regards, Chris |
The Following User Says Thank You to Volvo_133 For This Useful Post: |
Aug 13th, 2021, 15:52 | #3 | |
Master Member
Last Online: Mar 24th, 2024 21:35
Join Date: Aug 2006
Location: Peterborough
|
Quote:
If anyone else can confirm this would work, Chris, I'll take you up on your offer.
__________________
Sinderland Road through Dunham Town - The interesting way home. |
|
Aug 14th, 2021, 09:21 | #4 |
VOC member
Last Online: Today 10:03
Join Date: Jan 2008
Location: Sheffield
|
If you remove the horn ring, 2 screws to rear of wheel spokes hold ring in place, if you see 2 threaded holes in the wheel at 34mm centres you should be fine.
I should be at Sywell hopefully next month and could bring it, though its not a big heavy item to post. Chris. |
The Following User Says Thank You to Volvo_133 For This Useful Post: |
Aug 16th, 2021, 09:06 | #5 | |
Master Member
Last Online: Mar 24th, 2024 21:35
Join Date: Aug 2006
Location: Peterborough
|
Quote:
Aye, I had the horn ring off the other day. Is the 34mm you speak of the diameter of the holes, or the distance between them?
__________________
Sinderland Road through Dunham Town - The interesting way home. |
|
Aug 16th, 2021, 09:51 | #6 |
VOC member
Last Online: Today 10:03
Join Date: Jan 2008
Location: Sheffield
|
The 2 holes are drilled 34mm apart when measured from the centre to centre of each hole.
The holes maybe 8mm. Imagine if they were drilled 34mm there would be no steering wheel material left! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|