VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox
v40 1.9 tdi 2003 dashboard removal/replacement.......this is not a guide......its just the way i did it......please let me know of any mistakes,and i will try and edit them.apologies for not been very good at explaining how to.....thanks to ANTZ for supplying me with the dash and steering wheel...........the thing is i am unsure of,is whether i have showed all of the dash bolts to be removed or not.....i have not shown which clips to remove to get the dash out....but it was not too many....do not be put off too much by the picture shown with the dash out,as quite a bit is still in place.just do the reversal of what you removed....tips..... while you have the dash out check that the matrix is in good working order....remove the metal plate with the vin number on it from the edge of the dash(2 screws) and put on replacement dash......clean edge of replacement dash.....ideally 2 people needed to put dash in......be careful when removing the plastic clips to loosen the wiring,as there is some sharp metal under there.......WARNING......put the receiver in the dash first(it sits above the dash clocks)before putting the dash in.and dont forget to connect it up first thing once the dash has been partly bolted in place..... and make sure the padding on top of the air vents are well stuck down too.....good luck......for picture 20 please open pdf file thanks
__________________
volvo v50 2.0 se lux D estate 2007
s/h volvo v40d estate 2003
Last edited by neanderthal; Aug 24th, 2014 at 22:09.
The Following 6 Users Say Thank You to neanderthal For This Useful Post:
Information
Aug 24th, 2014, 20:54
dashboard removal/replacement v40 1.9 2003
......the thing is i am unsure of,is whether i have showed all of the dash bolts to be removed or not.....i have not shown which clips to remove to get the dash out....but it was not too many....do not be put off too much by the picture shown with the dash out,as quite a bit is still in place.just do the reversal of what you removed....tips..... while you have the dash out check that the matrix is in good working order....remove the metal plate with the vin number on it from the edge of the dash(2 screws) and put on replacement dash......clean edge of replacement dash.....ideally 2 people needed to put dash in......be careful when removing the plastic clips to loosen the wiring,as there is some sharp metal under there.......WARNING......put the receiver in the dash first(it sits above the dash clocks)before putting the dash in.and dont forget to connect it up first thing once the dash has been partly bolted in place..... and make sure the padding on top of the air vents are well stuck down too.....good luck
......for picture 20 please open pdf file thanks
Threaded Mode