Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > 850 / S70 & V70 '96-'99 / C70 '97-'05 General > 850/x70 S1 Articles

Notices

850/x70 S1 Articles How to's and step by step guides on a specific repair or modification to a Volvo 850/70 car.

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

How To Build A Phase 2, 4.3 Motronic Flash Code Reader

Views : 40825

Replies : 0

Users Viewing This Thread :  

 
 
Thread Tools Display Modes
Old Nov 3rd, 2007, 14:50   #1
Jod T5
Phoenix from the ashes
 
Jod T5's Avatar
 

Last Online: Mar 19th, 2024 10:13
Join Date: Jan 2006
Location: Finchingfield
Default How To Build A Phase 2, 4.3 Motronic Flash Code Reader

here is your obd port under the coin rack....visual courtesy Chris_Rogers (not that he knows lol)

connect a wire from the + out feed port, number 16 securing the wire into the port with a paperclip, to a 12volt led......ignore the in line resistor in the picture
connect two wires to the other port of the led....connect one lead to port number 3, again a paper clip will be usefull....
with the ignition off the light should illuminate, although this may not happen on all models...
turn the key to pos II and the light will go out.....

the next step, with key at pos II is to dip your spare wire into port number 5 for a couple (2/3) seconds..., your lamp will illuminate...after a couple of seconds remove the wire from port number 5 and watch the lamp....
it may take a few tries to read the flashes as there will be a pause between each digit for you to record....
for instance the normal, nothing wrong code is
flash.........flash.........flash........
the code for 1-2-3 is
flash.........flash....flash............flash..... flash.....flash.....
it will become obvious when you see it........
to delete any codes insert the port 5 wire for SIX second and remove and wait...after a moment or two the light will flash, immediately and before the light goes out reinsert the wire to port 5 for another 6 seconds..., this may need to be done several times before you get the hang of it.....
by moving the wire from port number 3 to port number 6 and carrying out the same proceedure you can check your climate control ecu
by moving the wire from port number 3 to port number 13 and carrying out the same proceedure you can check your cruise control ecu although you will have to drive the car over 20 mph and not removed the key before you check this, ie to turn off the car turn to position I and then back to II
This proceedure can also be carried out using a 12v multimeter instead of the LED
__________________
Dum Spiro Spero
VOC 20419

Last edited by Jod T5; Oct 31st, 2009 at 12:11.
Jod T5 is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 14:48.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.