|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
V60 Rear brake pad retainer sliding pinsViews : 414 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 24th, 2020, 20:47 | #1 |
Member
Last Online: Mar 20th, 2024 12:05
Join Date: Aug 2017
Location: Herts
|
V60 Rear brake pad retainer sliding pins
Can anyone help me locate parts. I'm in search of a kit to replace the sliding pins on the rear brake pad retainers. Volvo said they only supply the whole retainer with bolts and pins. Surely they are available individually ?
Thanks. |
Apr 23rd, 2020, 10:13 | #2 |
New Member
Last Online: Dec 11th, 2021 18:05
Join Date: Dec 2018
Location: Huddersfield
|
Any good fella?
https://www.ebay.co.uk/itm/282569745233 Although prob not as you’d have seen these already I guess! Still looking at the rear brake scrape issue? Last edited by daveaasmith; Apr 23rd, 2020 at 10:31. Reason: Incorrect reply |
Apr 23rd, 2020, 10:57 | #3 |
Junior Member
Last Online: Feb 28th, 2024 11:37
Join Date: Oct 2018
Location: Nottingham
|
The pins just 'pop' out, so easy to check. I suppose if the bores are worn and the pins wobble excessively, then you might need a new carrier.
Just did the rear pads on my XC60 at 30k, and as new. Wipe clean and a smear of high temperature silicone grease and back in. If it helps, my rear pads were clearly marked TRW as well as Volvo, so probably a more common part than you would think! |
Apr 25th, 2020, 20:06 | #4 |
Member
Last Online: Mar 20th, 2024 12:05
Join Date: Aug 2017
Location: Herts
|
The issue was a rounded bolt, which played ball in the end. I was just preparing for worst case scenario if I had to cut or totally annihilate the bolt head. Fortunately some heat and patience removed it.
In regards to the brake scrape I have come to the conclusion its an inherent part of the design. I have driven two other V60s and the scrape still exists. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|