Help with OBD II Output - V70R Phase 1

[djwazza68]

Cookeh you are a true gentlemen! Many thanks for the decode, I will have go at the MAP sensor; does this also give me a Lambda light?

One other issue is that I still have a TRACs light after the standard ECU re-soldering and after running the full 850 OBD diagnostic without any errors. What could be the problem? Does it just need a run (which it hasn't yet had)?

[Cookeh]

Originally Posted by djwazza68

Cookeh you are a true gentlemen! Many thanks for the decode, I will have go at the MAP sensor; does this also give me a Lambda light?

One other issue is that I still have a TRACs light after the standard ECU re-soldering and after running the full 850 OBD diagnostic without any errors. What could be the problem? Does it just need a run (which it hasn't yet had)?

ABS/TRACS lights will remain lit until they go through their self-diagnostic test at the start of every drive cycle.

MAP sensor could be the cause (you do have two codes relating to it!), but I'd still be checking each and every vacuum line - they are the most common causes of lambda issues.

[djwazza68]

The lambda light was a simple fix. A £15 MAP sensor fitted in 30 seconds, reset the codes and light now gone. Many thanks for the advice.

[Martin Cox]

Thanks for the update. It's greatly appreciated.

Martin