|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Replacing High Performance AmplifierViews : 1330 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 1st, 2010, 19:03 | #1 |
New Member
Last Online: Jan 28th, 2011 17:53
Join Date: Aug 2008
Location: Soton
|
Replacing High Performance Amplifier
I have an intermittent sound issue which seems to be coming from the Amplifier. I have recently acquired another amp of the same model number. When installed the radio works for about 10 or 20 seconds then switches off, and won't switch on again. Replacing with the original makes it work again
I'm guessing the headunit is paired in some way with the amp. How do I get the two to work together. Its a 2004 model if that matters. Thanks, Nathan |
Oct 1st, 2010, 22:24 | #2 |
Master Member
Last Online: Feb 3rd, 2024 18:39
Join Date: Sep 2009
Location: Sunny Scotland
|
Hi Nathan
Do you know the replacement amp works 100% without fault? Shutting down like that could indicate a blown channel.. ... although it may need paired, I would hope not! I can check if it does need paired, but not right now. David |
Oct 2nd, 2010, 09:08 | #3 |
New Member
Last Online: Jan 28th, 2011 17:53
Join Date: Aug 2008
Location: Soton
|
Hmm - Just read a bit more and spoken to the local Volvo dealership.
Apparently you need to make software downloads to the MOST system to switch off security and potentially control downloads to the Amp. Any experts on this that don't charge the earth! Thanks |
Oct 2nd, 2010, 11:40 | #4 |
Master Member
Last Online: Feb 3rd, 2024 18:39
Join Date: Sep 2009
Location: Sunny Scotland
|
Did you consider getting your old amp repaired?
It may be just a simple dry joint. David |
Oct 5th, 2010, 15:07 | #5 |
New Member
Last Online: Jan 28th, 2011 17:53
Join Date: Aug 2008
Location: Soton
|
Where would I go to get the old amp repaired. I'm sure it is a dry joint.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|