|
Information |
|
V40 Door Plate Nut, Cargo Net Lower ClipsViews : 854 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Apr 5th, 2010, 13:30 | #1 |
Master Member
|
V40 Door Plate Nut, Cargo Net Lower Clips
Hi All,
I'm currently chasing down two parts for my newly acquired V40. One is puzzling even the volvo garage. I have a bolt sticking out of my drivers door below the lock. Upon taking the door apart, this appears to be attached to a covering metal plate that supports the drivers door handle. It's not on the passenger side and on an earlier example I found at the local scrap heap it's also missing. The passanger door has a rubber plug where it would emerge, were it there. It's scraping paint off every time I close the door. So the door needs adjusting, but I need whatever goes on the end of this bolt! I assume its some sort of nut with a rubber cover to protect the door. Vadis has no clues either that I can see. Secondly, I've got the roof inserts for the cargo net and dog guard installed, but I don't have the lower clips that hold the cargo net on the wheel arches in the boot. Anyone know where I can get these or what I'm asking Volvo for? Many Thanks, Daniel. |
Apr 5th, 2010, 14:17 | #2 |
Premier Member
Last Online: Yesterday 19:00
Join Date: Dec 2002
Location: Co. Limerick, Ireland
|
Pictures speak a thousand words...
Sounds like someone did a bodge job on the drivers door??? I think someone just recently posted a thread about the clips you require to hold the guard to the back of the load cover.
__________________
Liam... '96 854 TDI SE, '99 V70 2.5D S, '05 C70 2.0T Collection, '05 S80 2.0T SE, '15 V70 D4 SE Lux Nav. |
Apr 6th, 2010, 17:14 | #3 |
Master Member
|
Hi Baffler,
I've managed to find the cover part in Vadis. So it's a genuine part. It's just Vadis gives no clue as to the nut on the door to hold the cover in place. I've ordered a replacement "cover" from Volvo at £8 just in case it's different. Thanks for the help once more! Any idea on where the clips thread was? Many Thanks, Daniel |
Apr 6th, 2010, 18:34 | #4 | |
Premier Member
Last Online: Yesterday 19:00
Join Date: Dec 2002
Location: Co. Limerick, Ireland
|
Quote:
Here's another recent thread regarding the dog guard clips/fitting kit. The "Search this forum" tool is very good
__________________
Liam... '96 854 TDI SE, '99 V70 2.5D S, '05 C70 2.0T Collection, '05 S80 2.0T SE, '15 V70 D4 SE Lux Nav. |
|
Apr 6th, 2010, 20:21 | #5 |
Master Member
|
Hi there,
I missed that thread on my search! Great. I managed the roof mounts with very little trouble. It's the lower mounts I don't have any screw holes for in the back of my seats. I assume I just hang the dog guard and mark / drill them. I'm actually trying to fit one of these: http://vccs.volvocars.se/accessories...VCC-210485.htm This has clips, lower down in the side of the rear compartment. Again, I'm missing them. Many Thanks, Daniel. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|