|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Need advice where to start M56Views : 272 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 23rd, 2019, 12:36 | #1 |
Junior Member
Last Online: Jun 4th, 2021 13:24
Join Date: Oct 2017
Location: Weinfelden
|
Need advice where to start M56
Hi @all,
after my 2003 2,5TAWD died just before christmas, i bought a 2001 V70 B5244S with manual gearbox M56, 300000km on the clock, It's a fine car, service history through all the years is complete, but the reverse gear is hard to shift. Clutch works fine. So where to begin to make the shifting smoother? Known problem with the VAG-Vehicles from the 90-2000 models, ther i got a repair kit witch all joints and rubbers... Thanks for your advice and have a nice weekend |
Mar 23rd, 2019, 13:27 | #2 |
Premier Member
Last Online: Mar 25th, 2024 23:28
Join Date: Aug 2013
Location: Emsworth,hants
|
This car has nothing to do with VAG,
look at all of the engine mounts, remove and look at the gearbox to subframe torque mount as the small bush fails, Dave |
Mar 23rd, 2019, 15:41 | #3 |
Junior Member
Last Online: Jun 4th, 2021 13:24
Join Date: Oct 2017
Location: Weinfelden
|
Hi Dave,
for sure i know that the Volvos doesn't have any relations to VAG in this case. It's my 8th Volvo over the years (745/945/V70II) What i tried to say, that for VAG-Vehicles you get a overhoul-set for the whole kinetic between shifthandle and gearbox. So let me ask another question: in my Vadis there ist shown a rubber? at the end of the shiftstock. To look if it's damaged i need to remove the top of the stock, the handlebar. How do i do that? Is it screwd onto the stock or fixed otherwise? Enginemounts i'll check next week, i changed the upper when i got the car. All other mount i've bought further for my dead v70 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|