|
Information |
|
Chrome nuts for Auriga alloysViews : 234 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 16th, 2019, 13:12 | #1 |
Premier Member
Last Online: Yesterday 18:50
Join Date: Jul 2012
Location: Lenzie
|
Chrome nuts for Auriga alloys
Anybody have a set. Or can possibly confirm if any of the 399 million ones on Ebay will also fit with correct taper etc
Cheers
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 |
Mar 16th, 2019, 13:12 | #2 |
Premier Member
Last Online: Yesterday 18:50
Join Date: Jul 2012
Location: Lenzie
|
Drat ! Meant to post in wants
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 |
Mar 20th, 2019, 20:05 | #3 |
VOC Member
Last Online: Today 01:14
Join Date: Feb 2008
Location: Gloucester
|
The part number you want is 3529669. They take a 19mm wrench. They are still available new but cost a small fortune, especially given you need 20.
There are visually very similar ones that were designed for the V40 but which take a 21mm wrench. These probably wouldn’t fit, but I’ve never tried them. There were also similar ones for earlier cars that used an imperial thread and so won’t fit. If you want to go the non-OEM route you’ll be wanting 19mm hex, 12mm x 1.50 thread. I think they’re 60° tapered but I’m not sure so wait for someone else to confirm that. If you get tapered/radius wrong your wheel nuts will work loose and your wheels will fall off. That’s another good reason for staying OEM. |
The Following User Says Thank You to Forrest For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|