|
Information |
|
1990 gl B200FViews : 567 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Oct 3rd, 2017, 21:16 | #1 |
Not a junior anymore
Last Online: Apr 15th, 2024 19:03
Join Date: Nov 2014
Location: Worcester/Droitwich
|
1990 gl B200F
Hi Guys i am looking for a cold start injector for my B200F GL Estate..mainly because it is OK after it has warmed up and cant figure out what else it could be....i have replaced the sensor under the inlet side....or maybe a replacement injector as i cant find a new one anywhere.???? p s taking the injector off to get it cleaned too...??
|
Oct 4th, 2017, 10:21 | #2 |
Junior Member
Last Online: Mar 12th, 2024 14:17
Join Date: Nov 2016
Location: UK
|
Kjet? - Could be the cold start valve or also the warmup regulator?
|
Oct 4th, 2017, 11:39 | #3 |
Not a junior anymore
Last Online: Apr 15th, 2024 19:03
Join Date: Nov 2014
Location: Worcester/Droitwich
|
Not sure about the cold start valve but doesn't have a warm up regulator just cold start injector and its the jet H tronic system..??
|
Oct 6th, 2017, 22:28 | #4 |
Junior Member
Last Online: Mar 12th, 2024 14:17
Join Date: Nov 2016
Location: UK
|
Cold start valve / injector are the same thing.. if it's k jet tronic then I'm pretty sure you will have a warmup regulator too (hidden under the manifold). You can easily test the cold start injector by taking it out, cranking the engine and testing the spray pattern.
|
Oct 13th, 2017, 11:35 | #5 |
Not a junior anymore
Last Online: Apr 15th, 2024 19:03
Join Date: Nov 2014
Location: Worcester/Droitwich
|
OK the system is jet tronic with no warm up regulator.... i have had the cold start injector tested and working perfectly ...then a friend lent me a noid to test the feed and there is no signal to the cold start injector..????? next step get wiring tested///oh yes all fuses ok /// any suggestions other than that please or if someone has had similar problems......but im still wondering if it will cure the rough idle until warm....regards Adrian...
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|