|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
2003 XC90 T6 Brake servo ProblemViews : 1633 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 17th, 2006, 18:16 | #1 |
Guest
Location:
|
2003 XC90 T6 Brake servo Problem
After having problems with the servo on this car for the last week, my local dealer is replacing it under warranty. The symptoms were that it was not holding vacuum after the engine was turned off, and then took quite a while to start working again once the car was restarted. The fault started off being intermittent but was getting progressively worse.
I was informed by the dealer that servos within a certain date range were being replaced if they exhibited a problem. I had to check the label and read out the number under the lower barcode (mine started 2258). They came back to me about an hour later and said it was one of the affected batch, and that they would replace it. I was unaware there was a problem with some of the servos fitted to these cars, and wondered if anyone else has experienced a similar problem. |
Jan 20th, 2006, 01:40 | #2 |
Premier Member
Last Online: Apr 10th, 2014 00:01
Join Date: Feb 2002
Location: Tonyrefail
|
This is early for many of this fault to show up as yet. Hopefully Volvo will pick them up with recall action so that they do not cause problems. Thanks for the advance warning of this.
All the best, Peter. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|