xad001x0w's big thread of want

[James_EG_940]

Hi folks,

That's it, I've finally cracked and have convinced myself that it is time to pump a load of cash into the old gal to keep her going for another while. However, she'd like a few things. If you've got any of these bits, do give me a shout!

(All parts for L reg 940 estate)

Body panels in black - paint code 019 (or sometimes just 19)
- N/S wing
- O/S wing
- Bonnet

Windscreen trim and clips

O/S quarter panel window trim and clips (bottom of glass)

Cruise control kit for un-wired manual cars

Egg crate grill

Clear rear lights

Clear front indicators

Matching pair of headlights in good condition

Centre caps for 15" alloys, original part number 1343663-9, fits dracos, hydras and orions

Black half-leather seats

960 style upholstered pillar trim

Arm rest with cup-holder

The slightly nicer reading light!


I'm sure there is more that I'd want but this is all I can think of right now at this time of night.

[minty]

Hi, I should have a set of center caps. Will check after lunch and report back
Cheers Minty

[TheBoostBus]

I have a few spare egg crates and some clear front indicators

[Skyedriver]

Is it the full headlight or just the glass you require?
I have two good glasses, one chrome plastic reflector bit but up in Yorkshire.
Might have the other reflector up in Scotland
Could post them I suppose
Make me an offer

[James_EG_940]

Certainly interested in your things BoostBus and Minty

Well at some point in the past someone has clearly replaced one of the headlights and now they do not match, one has quite clear glass but with a rusty reflector inside the other quite murky old glass with good reflectors inside. If it's any use I'm actually planning to be up on Skye for a couple of days in August...

[clocks2003]

I can do the headlights complete - photos would be sent in a PM but they are not on the net... I have sent further info in a PM anbd asked for your email so I can attach the photos and send them to you!
I can also do the trim from an R-reg 940 rear O/S window, but it seems to be just a metal strip with lugs which go into clips in the rubber round the window & I can't see how to remove the clips from the rubber or the rubber from the window.
I can also do the trim and clips from round the windscreen - though again this may be different for the earlier model - anyone know about this?
Andrew