|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
XC90 AWD problems.Views : 432 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 15th, 2018, 20:58 | #1 |
Junior Member
Last Online: May 4th, 2024 09:30
Join Date: Jun 2007
Location: Swansea
|
XC90 AWD problems.
I have the AWD disabled system check message. it is the Gen 4 system.
Plugged into the icarsoft scan tool gives DEM 000E - pump motor. Is a safe assumption its the motor or should I look else where? I have read the motor should softly hum on tick over - so maybe there is a start there, also read about resistance check on the motor, but cant remember the values. Any advise welcomed Pete. |
Nov 15th, 2018, 21:46 | #2 |
Bungling Amateur
Last Online: Yesterday 21:02
Join Date: Aug 2014
Location: Beverley, East Yorks
|
Probably the most common AWD failure after the splined sleeve on E3 models.
It's worth checking whether the pump has failed electrically or mechanically, it might have some dirt in it, or the brushes on the motor may have worn away (a few members have replaced these). That involves removing it, inspecting it and powering it up on the bench.
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
Nov 15th, 2018, 21:54 | #3 |
Junior Member
Last Online: May 4th, 2024 09:30
Join Date: Jun 2007
Location: Swansea
|
Im thinking about powering it insitu to check.
At least i know its not the angle gear, this is brand new at the dealer 6 months ago. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|