Radio/Stereo: CR-2170+HA-4020 DIN Pinout - Integration OK/NOK

[volvo264]

HI Folks

I am researching if CR-2170 with HA-4020 is possible without too much modification.

Does anyone have the actual pin out at each unit end they can share?

CR-2170 ( 8 pin DIN output )
HA-4020 ( 6 pin DIN input)

see attach pic

I found some infor under turbobrick forum but not actual unit pin outs .
http://forums.turbobricks.com/showthread.php?t=114932

Searching google on pin outs for both but no luck.

Just got a CR-2170 yesterday to upgrade my 1977 264GL B27E Sanyo 2x3watt.. Cassette/radio unit. I tested today on the bench and sounds pretty good.
you can listen below .
https://youtu.be/YQt-LOHnV8Y.

I am definitely looking to upgrade 2 way to 4 ways speaker but need to first see if this combination would work without too much modification.

I am waiting for the HA-4020 to be delivered for testing but would be handy if there is a pin out table for both unit.

Much appreciated.

Don

[Clifford Pope]

I've been watching this with interest as the number of Views has crept up but no one has replied.

Sorry, but it does look as if no one has the faintest idea what you are talking about.

[volvo264]

Originally Posted by Clifford Pope

I've been watching ..

Sorry, but it does look as if no one has the faintest idea what you are talking about.

Sounds like it , but i thought this topic would have been investigated years ago in this forum.

Been scanning other forum and found something close on a Saab pre-amp out 8 pin DIN ( Clarion head unit on 1998 SAAB 900 SE ) . Its a start and I may get a pattern on pin outs and just documenting what i found so far.

Will get 8pin and 6 pin connector bits , cables for some test over the weekend . And the HA-4020 amp just got delivered too.