|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Cleaning the PCV D5Views : 14668 Replies : 15Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 6th, 2014, 21:31 | #1 |
Senior Member
Last Online: Jun 8th, 2022 22:38
Join Date: Oct 2008
Location: Here
|
Cleaning the PCV D5
Any ideas on how to clean the PCV?
I have smoke coming from the oil filler and dipstick http://www.volvoforums.org.uk/showthread.php?t=142453 |
Feb 7th, 2014, 11:51 | #2 |
Senior Member
Last Online: Jun 8th, 2022 22:38
Join Date: Oct 2008
Location: Here
|
Anhyone?
|
Feb 7th, 2014, 12:13 | #3 |
Premier Member
Last Online: Jun 10th, 2024 09:51
Join Date: Dec 2007
Location: Wexford
|
I've been looking at that thing for a while. Info is scarce. The only thing gleaned from searches is that anyone who has taken the top off has found nothing and blocking seems to be a petrol issue. Getting it out looks tricky as the top screws are almost inaccessible and I can't work up the enthusiasm to pull the entire oil filter housing off - curiosity is a dangerous thing.
|
Feb 7th, 2014, 14:30 | #4 | |
Jono
Last Online: May 21st, 2020 06:36
Join Date: Apr 2006
Location: Norwich
|
Quote:
http://www.youtube.com/watch?v=otzkZ_f3Y3s
__________________
Jono (54 MY2004 S60 D5 SE Geartronic) |
|
The Following User Says Thank You to Jonathan_angelo For This Useful Post: |
Feb 7th, 2014, 15:59 | #5 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
http://www.youtube.com/watch?v=xlI0LC33skE
mine is the same as this on the 185 bhp it also did this on thew 163 and had no issues. mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Feb 7th, 2014, 18:57 | #6 |
Senior Member
Last Online: Jun 8th, 2022 22:38
Join Date: Oct 2008
Location: Here
|
Thanks ever so much, that's reassuring,
|
Feb 7th, 2014, 19:11 | #7 |
Premier Member
Last Online: Jun 10th, 2024 09:51
Join Date: Dec 2007
Location: Wexford
|
I have an idea that the crankcase pressure goes negative over 1500 rpm or something like that so at idle a bit of fumes is normal.
|
Mar 4th, 2014, 18:53 | #8 |
Master Member
Last Online: Feb 8th, 2015 12:06
Join Date: Jan 2011
Location: Cardiff
|
Hmm. My indy said there's a pressure build up in the sump pushing the dipstick out..possible breather blocked. They've been pretty good before. Also overfilled with oil. Not the rising oil level apparently!
|
Mar 4th, 2014, 22:14 | #9 |
Member
Last Online: Jun 17th, 2023 21:35
Join Date: Nov 2007
Location: Camberley
|
to take the top off the separator housing you have to remove the filter housing bolts - 4 of them. If you do this you will need to fit 2 new seals/gaskets and also need a new top to the separator as the gasket for this does not come on its own. A new seal for the dipstick tube would likely need to be replaced.
I have just checked mine at 263k and it was clean as a whistle but may not be the case on every car. It takes about 2 hours to remove and refit and a small amount of oil is lost - when vehicle is on ramps at the front. It costs approx £37 for the seals and top cover (called a valve). It will leak as mine did hence replacing the seals. Brendan W 'I have an idea that the crankcase pressure goes negative over 1500 rpm or something like that so at idle a bit of fumes is normal.' Can be observed by slightly removing the dipstick so vapour can be seen then rev slowly to 1500rpm and vapour gets sucked down.
__________________
2005 V70 2.4 D5 SE Geartronic 324,000 miles 2014 V60 2.0 VEA D4 Geartronic 120,000 miles 2002 S40 1.8 Bi-Fuel Manual 197,000 miles (Previous) 1998 V40 T4 Manual 120,000 miles (Previous) 1998 S40 2.0 Auto 187,000 miles (Previous) Last edited by gillypop; Mar 4th, 2014 at 22:25. Reason: additional info |
The Following User Says Thank You to gillypop For This Useful Post: |
Mar 5th, 2024, 07:20 | #10 | |
New Member
Last Online: Mar 5th, 2024 10:32
Join Date: Mar 2024
Location: High Wycombe
|
PCV Valve replacement
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|