V70r engine,m90 gearbox,sump,mounts,harness, rwd conversion

Ml 1990 740 turbo · May 17th, 2015, 17:55

I'm considering selling my full rwd white block conversion. I have 2 and it'll be a couple of years until I get around to doing the conversion. I need the money at the minute so I'm considering selling one if I get a fair price.
What it includes
1997 v70r engine about 165.000 miles (excellent engine, was my daily driver for 4 years)
Full engine harness with chipped ecu around 300bhp
M90 gearbox with starter bracket. But u will need clutch fork and shifter linkage (they are easy enough to get, as there the same as a red block m90) I know this as I pinched them for my red block m90 swap, as I bought one without them.
960 sump (retro turbo do a exchange for £80 for a shortened sump) pick up pipe, dip stick
960 engine mounts, upper and lower
960 and 850 water pipes, which I've began to modify. Just need welding
Later type t5 inlet manifold (end has been cut slightly to clear power steering reservoir return pipe) will need plate welding on
The engine is complete except for turbo and injectors (which again I've pinched)
I've removed the two studs on the exhaust manifold and drilled the holes. So the turbo can be spun around.

I have everything u would need for the conversion minus turbo,injectors, gear linkage,clutch fork and propshaft.

Read Chesh 740r t5 thread for what is involved in the conversion.
I'm open to sensible offers
Obviously collection only

Ml 1990 740 turbo · May 17th, 2015, 23:31

Just thought! I think it was the turbo that I removed the studs and drilled not the manifold.

okoye · May 18th, 2015, 15:44

Willing to let go of the box alone?

miltski · May 18th, 2015, 15:58

If you do decide to sell bits separate I could do with a V70r engine, have turbo and injectors still in my broken one...

Ml 1990 740 turbo · May 18th, 2015, 17:58

Quote:

Originally Posted by okoye

Willing to let go of the box alone?

Possibly, Its on eBay as a kit. If it doesn't sell and no one on here wants the full thing. I might split it. What would you offer on the box?

howarddj · May 18th, 2015, 21:12

have you got an ebay link?
im struggling to find it

Ml 1990 740 turbo · May 18th, 2015, 21:36

Quote:

Originally Posted by howarddj

have you got an ebay link?
im struggling to find it

Type in volvo t5 engine conversion should come straight up.

skidje · May 19th, 2015, 05:33

http://www.ebay.co.uk/itm/Volvo-240-...item25a6916cf8

howarddj · May 19th, 2015, 12:05

thanks, now i just have to resist buying it.

rwd whiteblock or pay my rent..... tough decision.

doingitsideways · May 19th, 2015, 13:32

Quote:

Originally Posted by howarddj

thanks, now i just have to resist buying it.

rwd whiteblock or pay my rent..... tough decision.

If it's an estate, you can live in the car

May 17th, 2015, 17:55	#1
Ml 1990 740 turbo Master Member Last Online: Feb 6th, 2024 22:25 Join Date: Dec 2014 Location: Newcastle	V70r engine,m90 gearbox,sump,mounts,harness, rwd conversion I'm considering selling my full rwd white block conversion. I have 2 and it'll be a couple of years until I get around to doing the conversion. I need the money at the minute so I'm considering selling one if I get a fair price. What it includes 1997 v70r engine about 165.000 miles (excellent engine, was my daily driver for 4 years) Full engine harness with chipped ecu around 300bhp M90 gearbox with starter bracket. But u will need clutch fork and shifter linkage (they are easy enough to get, as there the same as a red block m90) I know this as I pinched them for my red block m90 swap, as I bought one without them. 960 sump (retro turbo do a exchange for £80 for a shortened sump) pick up pipe, dip stick 960 engine mounts, upper and lower 960 and 850 water pipes, which I've began to modify. Just need welding Later type t5 inlet manifold (end has been cut slightly to clear power steering reservoir return pipe) will need plate welding on The engine is complete except for turbo and injectors (which again I've pinched) I've removed the two studs on the exhaust manifold and drilled the holes. So the turbo can be spun around. I have everything u would need for the conversion minus turbo,injectors, gear linkage,clutch fork and propshaft. Read Chesh 740r t5 thread for what is involved in the conversion. I'm open to sensible offers Obviously collection only Last edited by Ml 1990 740 turbo; May 17th, 2015 at 19:18.

May 18th, 2015, 15:58	#4
miltski Junior Member Last Online: Jan 18th, 2016 17:24 Join Date: Dec 2006 Location: london	If you do decide to sell bits separate I could do with a V70r engine, have turbo and injectors still in my broken one... __________________ Life's short...but not so short you have to rush it!

May 17th, 2015, 23:31	#2
Ml 1990 740 turbo Master Member Last Online: Feb 6th, 2024 22:25 Join Date: Dec 2014 Location: Newcastle	Just thought! I think it was the turbo that I removed the studs and drilled not the manifold.

May 18th, 2015, 15:44	#3
okoye Junior Member Last Online: Apr 6th, 2024 02:10 Join Date: Jul 2013 Location: West Hartford	Willing to let go of the box alone?

May 18th, 2015, 21:12	#6
howarddj Volvo conservationist Last Online: Sep 11th, 2021 22:32 Join Date: Nov 2014 Location: Canterbury	have you got an ebay link? im struggling to find it

May 19th, 2015, 05:33	#8
skidje Master Member Last Online: Mar 8th, 2024 05:45 Join Date: Nov 2002 Location: Eindhoven	http://www.ebay.co.uk/itm/Volvo-240-...item25a6916cf8

May 19th, 2015, 12:05	#9
howarddj Volvo conservationist Last Online: Sep 11th, 2021 22:32 Join Date: Nov 2014 Location: Canterbury	thanks, now i just have to resist buying it. rwd whiteblock or pay my rent..... tough decision.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)