|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Volvo C30 T5 Fuse BlowingViews : 656 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 8th, 2017, 11:37 | #1 |
New Member
Last Online: Jun 1st, 2019 10:23
Join Date: Nov 2017
Location: Huntly
|
Volvo C30 T5 Fuse Blowing
Hello,
I have been having problems with fuse #33 which is 20amp blowing on my C30. It throws up an engine management light for the bank 1 lambda sensor but also last night for the first time brake failure came up on the dash and all the dials stopped working including the indicators. Once I stopped and pulled the key out the ignition and started the car again it was back to normal with just the engine management light on. Any help with solving this would be great. Thanks Stewart |
Nov 8th, 2017, 19:16 | #2 |
138gat
Last Online: Mar 29th, 2020 13:40
Join Date: Jun 2011
Location: Burnley
|
Had a problem with my s40 blowing a fuse, turned out the wiring loom at the front of the engine was shot , hope this helps
|
Nov 13th, 2017, 07:39 | #3 |
New Member
Last Online: Jun 1st, 2019 10:23
Join Date: Nov 2017
Location: Huntly
|
Was it a certain fuse that kept blowing or multipul fuses where was the damage on the loom?
|
Nov 13th, 2017, 18:07 | #4 |
138gat
Last Online: Mar 29th, 2020 13:40
Join Date: Jun 2011
Location: Burnley
|
it started with a certain fuse, No 35 in my case if i remember rightly and when investigated loads of wires had disintigrated , front of engine , surprised it ran at all !!!
Last edited by 138gat; Nov 13th, 2017 at 18:09. |
Feb 20th, 2018, 23:21 | #5 |
New Member
Last Online: Jun 1st, 2019 10:23
Join Date: Nov 2017
Location: Huntly
|
Hello,
Just a follow up on this in case anyone else has the same problem it ended up being the brake vacuum pump that had burnt out (it is on the passenger front side of the engine bay part number 30793023) replaced it with a second hand one and has been fine ever since. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|