S40: Brake circuit warning light staying on

[PLANT]

Gone over a mini but hard speed bump "hard on left front tyre" and now light first time appeared on 🤦*♂️
1. I'm sure brake reserviour full
2. Need to check brake lights
3. Will see if can check and reset alert code
4. Read this thread and hoping mechanic not required to do as above.

Anyone experienced this from speed bump?

[PLANT]

Fluid is full.
Tried ebay ebdll but did not detect fault and unable find out or cancel code.

Sensor looks attached and in tack.

Just need to check all brake lights with mate.
Comes on after first press of brake pedal on start up.

[PLANT]

The update is definitely right back brake light out!
So now to get the right globe!
Opposite side of hard speed bump hit.. 🤔

[PLANT]

Replaced the globe which looked it tact and still not working?
Now is it a fuse?
And need to look for a code scan

Edit: Check break light interior fuse and in tact Left Brake light works, right side dose not. All other lights work?

Edit: The YouTube video pulled out the wrong light array... which I followed. It's the light array furthest from opening in the corner!
Went to mechanic and he showed me in 2 minutes🤦*♂️
Issue fixed. Probably going to get charged next service for that 2 minutes!!!