|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Engine Mount QuestionViews : 488 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 23rd, 2014, 18:55 | #1 |
Member
Last Online: Jun 22nd, 2014 13:53
Join Date: Apr 2013
Location: Lincolnshire
|
Engine Mount Question
Just spent the afternoon trying to get to the bottom of the annoying fault on our XC90 D5 (goes into limp home mode with fault code ECM6805) and I think I have found the cause - leaking engine mounts.
The front doesn't hold vacuum at all and the rear will build up a vacuum on my tester but leaks off after a couple of seconds. I tested the hoses as well and they weren't the best so have replaced with some silicone hose I had in the garage. Now the front mount will obviously need replacing but on the rear mount I noticed there is a small rubber bung which the right angled adapter for the vac hose sits in had perished and split. Anyone know if this bung can be purchased separately or will I have to buy a rear mount as well? I have looked on VIDA but can only find the hose and the mount, no mention of the right angled adapter or the bung Last edited by dilksie; Feb 23rd, 2014 at 18:57. Reason: spelling corrections :-) |
Feb 24th, 2014, 10:22 | #2 | |
239,450 miles & counting!
Last Online: Jul 2nd, 2017 22:13
Join Date: Jun 2013
Location: Merseyside
|
Quote:
Mike |
|
The Following User Says Thank You to Ducklakeview For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|