|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
HS6 carbs Leaking ( again )Views : 2016 Replies : 30Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 5th, 2015, 15:16 | #26 |
Premier Member
Last Online: Dec 28th, 2022 12:25
Join Date: Jun 2009
Location: Mercville
|
Just to help ...previously mentioned about Weber antivibration mounts ...this is basically to stop the fuel from frothing and that is all...
The brass lever that is bent to adjust the float level can get worn with flats on and also the brass pin that holds it in the body can get a flat on and make the lever stick down so the float will not turn off the valve. Also where the fuel overflows out the hole on top of the cover i was misled once and in fact it was the worn rubber hose with the clip that let it leak when under a bit of pressure when the float shut off the flow!
__________________
Mercedes C320CDI Sport Estate 3 litre V6 7 Gear Auto Remap 290bhp 628Nm torque @ 1600revs 45.1mpg |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|