Jack stands

[skalra63]

Hi all

I need to lift the front of the car up in order to rotate the wheels. I'm going to try replacing the intake manifold and might have to clean the ports and its suggested that you rotate the wheels to close each valve before cleaning the gunk out. But I can't work out the best place to put jack stands. I have a trolley jack but obviously that will only let me lift one side.

Any recommended points for the stands?

[Simmy]

i usually use the subframe mounts make sure every thing is secure before going under the car .

[canis]

I wrote this for someone else, but you might benefit from reading it too.

https://www.volvoforums.org.uk/showp...5&postcount=17

As Simmy says, the subframe is your best option.