s40 2005 t5 srs airbag service urgent

[djsoheil]

hi guys i am new in this forum
i bought s40 t5 2005
the dime show srs airbag service urgent
i checked all the cable under the seat with multimeter all was ok
i tray disconnecting the battery for 30 min and put key in position II and connect it back or connecting ground to live and......
still noting
i connect my vida dice 2013a to car and read the car and there is no fault
i select srs and try to erase it but still the light is on
here is the pictures !!!
i know many people gone say is srs module but how can i be sure is srs module??
any idea?

[SonyVaio]

Can you post up a screen capture of

Diagnostic, Fault trace, Initial State tab please.

[djsoheil]

it say same ting as delivery tab . no fault found

[SonyVaio]

I'd try again but this time have the car started and check for codes. If you have SRS light/message then you should have a code of sorts.

[djsoheil]

i tryed with car on and with car key in position II and with car in position I

[djsoheil]

Originally Posted by sonyvaio

can you post up a screen capture of

diagnostic, fault trace, initial state tab please.

here is the pic

[SonyVaio]

Do you know anyone with another code reader? Doesn't need to be VIDA/DICE just to read the car and see if any fault code is present.

It is certainly strange that it would produce an error message in the DIM but not a code.

[djsoheil]

ok i tray to read the code and reset srs with another code reader it give me
1: ( srs-cfff ) control module internal fault
2 srs-0005 ) power supply from battery voltage is too low
3 srs-0003 )pad lamp faulty function
4 srs-cfff )control module, internal fault
5 srs-e001 )control module communication. faulty communication
6 srs-0002 )srs indication lamp. signal missing
then i tray to clear srs code and the code reader didn't do it
after that i install volvo dice on my other laptop and scan the car this time the dice give me the code !!!!!!!
the phone ring and i had to get back inside and disconnect my laptop after i get back about 10 min i tray to scan the code again with dice and dice don't show me any fault !!!!!!!!!!!!

[djsoheil]

i bought second hand module and gone to volvo dealer .they said because is my first time there they gone do free diagnostic . they said is my module when i ask them to program the other one they said is not possible !!!!!!they said once the software been install on module {burn on module } they can not replace the software !!!! many people the said volvo reprogram the module !!!! are the volvo lying to me ? by the way the said they need to order new one which cost $750