|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Headlamp stone guards - How to fit?Views : 409 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 18th, 2017, 16:11 | #1 |
VOC Member
Last Online: Mar 19th, 2024 15:10
Join Date: Dec 2007
Location: Chichester
|
Headlamp stone guards - How to fit?
I recently bought a pair of headlamp stone guards for my Amazon which came with three fixing brackets, each with a screw hole at one end. There were no instructions and I'm rather baffled as to how to fit them. The screw holes are small so they won't fix to the headlamp bowl. I guess, therefore that they fix to the headlamp adjuster screws somehow. But which way? If anyone has fitted them on their car and can post a photo then that would be great. Cheers
|
Oct 19th, 2017, 19:56 | #2 |
VOC member
Last Online: Mar 27th, 2024 20:16
Join Date: Jan 2008
Location: Sheffield
|
Hi,
I have never fitted these though am willing to have an educated guess. Remove the headlamp rim, 1 screw at 6 oclock. Now note 3 screws retaining inner rim. Remove 1 screw only at any time and fix one of your protector mounts under same screw. Fix protector to all 3 screws. 1 at a time so as not to drop headlght unit. You should now be able to refit outer headlamp rim. |
The Following User Says Thank You to Volvo_133 For This Useful Post: |
Oct 20th, 2017, 11:20 | #3 |
Master Member
Last Online: Yesterday 15:15
Join Date: Apr 2012
Location: Droitwich
|
Headlamp guard
Chris is correct, and this is how they look when fitted. The tabs bend so that you can remove and refit the guards. Probably best to fit rim, then guard.
Regards Andy. |
The Following User Says Thank You to old fart For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|