|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Aux / serpentine belt help needViews : 537 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 30th, 2020, 20:21 | #1 |
VOC Member
Last Online: Jan 29th, 2023 11:13
Join Date: Jan 2018
Location: Reading, Berks
|
Aux / serpentine belt help need
Looking to change my aux / serpentine belt and tensioner as I'm not 100% sure when they were last changed.
When I look in VIDA it shows two part numbers for the belt: 30731808 & 30731811 1 - How can I tell which one I need? 2 - I was planning to buy an INA tensioner & belt, is that a good choice? 3 - Is there anything else I should change while I am there? 4 - I was going to check the following: Alternator pulley check https://youtu.be/DLyiYnUkQuE?t=473 https://youtu.be/qJee0aSERoo?t=104 Check other pulleys turn and don't feel rough? Is that all I need to do? 5 - I assume that I should follow this video rather than SiRobb's video on doing this in the D5? https://www.youtube.com/watch?v=gTq8CDCkYl8 Apologies in advance for all the questions, a bit nervous about doing this and trying to cover everything! Car is 2002 v70 2.4 n/a auto with 150,000 miles
__________________
2002 Volvo V70 2.4 n/a auto |
Nov 30th, 2020, 21:30 | #2 |
Premier Member
Last Online: Apr 16th, 2024 11:05
Join Date: Jun 2016
Location: S****horpe
|
Can't help re- which belt you need or the difference between the two,but INA are ime a very good reputable make for belts and I believe their kits come with SKF bearings in pulleys/tensioners.Yes I'd feel for roughness/play in other pulleys[water pump etc]while the belt is off it only adds a few seconds to the job and gives a bit of peace of mind.
|
The Following User Says Thank You to Dippydog For This Useful Post: |
Nov 30th, 2020, 23:14 | #3 |
Premier Member
Last Online: Jul 26th, 2021 21:24
Join Date: Jun 2013
Location: Coldnada
|
These are my tips for gasoline engines. Also read in the video description
https://youtu.be/jTi558-Q9ZI This american site is pretty good to check the fitment - see the Fitment tab on each item page. You will need the longer belt. The shorter one was used on some XC90 engines that had a 120 bar p/s pump with a smaller pulley. Yours is a 110 bar pump with slightly larger pulley https://www.fcpeuro.com/ .
__________________
Several Volvo Repair Videos https://www.youtube.com/playlist?lis...ECTts0FSVSOT_c Last edited by oragex; Nov 30th, 2020 at 23:18. |
The Following User Says Thank You to oragex For This Useful Post: |
Dec 1st, 2020, 11:10 | #4 |
VOC Member
Last Online: Jan 29th, 2023 11:13
Join Date: Jan 2018
Location: Reading, Berks
|
Thanks for all the info guys, I bought an INA tensioner and a ContiTech belt from autodoc.
@oragex thanks for the link to your video, I had already watch it and I think most of your other ones! Keep the videos coming!
__________________
2002 Volvo V70 2.4 n/a auto |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|