|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
boot lid not opening s40 2011Views : 335 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 21st, 2020, 17:25 | #1 |
Junior Member
Last Online: Mar 5th, 2023 19:22
Join Date: Jan 2017
Location: dundee
|
boot lid not opening s40 2011
today I have problem that bootlid not opening but has warning on dash saying bootlid open ???. any tips or advice before tackling would be grateful thanks. switch,,,lock,,,,fuse,,,, wiring,,,, {hope its not}
Last edited by badger146; Nov 21st, 2020 at 17:42. |
Nov 21st, 2020, 22:23 | #2 |
Experienced Member
Last Online: Today 14:22
Join Date: Jun 2007
Location: L/H side
|
Its usually the loom broken where the lid goes up and down there is a black multi plug tucked up under the hat shelf on the left side and it goes into the boot lid its a reasonable price ... £ 30 last time i bought one .. all the wires are black ...on the boot part of the loom
__________________
My comments are only based on my opinions and vast experience . |
Nov 21st, 2020, 23:13 | #3 |
Member
Last Online: Today 20:47
Join Date: Jun 2018
Location: Midlands
|
I had this happen last month to my 2011 S40, was the wiring loom. Got one from a dealer and fitted it on about an hour using this guide https://www.volvoforums.org.uk/showt...ot+wiring+loom
|
The Following User Says Thank You to PNM For This Useful Post: |
Nov 22nd, 2020, 03:31 | #4 |
Junior Member
Last Online: Mar 5th, 2023 19:22
Join Date: Jan 2017
Location: dundee
|
thank you for step guide. was wondering the photo where carpet trim removed... what does the shorter go , is it a plug. looks like I round grommet. suppose ill bit bullet get new one, but boot still not open. is there only one harness for this found 1 with part number 30724788
Last edited by badger146; Nov 22nd, 2020 at 03:37. Reason: need more info |
Dec 1st, 2020, 22:29 | #5 |
Junior Member
Last Online: Mar 5th, 2023 19:22
Join Date: Jan 2017
Location: dundee
|
hi all, got harness fitted today all good , thanks again for guide,but upon finish noticed one of bulbs in reg plate had blew, could this have caused the harness to temp malfunction, ie just put new bulb instead of harness mmm. just a thought
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|