|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Spring compressorsViews : 528 Replies : 8Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 11th, 2016, 18:50 | #1 |
Premier Member
Last Online: Jun 26th, 2022 23:42
Join Date: Mar 2012
Location: Midlands
|
Spring compressors
For those who like to get their hands dirty, can anyone recommend some decent spring compressors- yes there's load on fleaBay but the idea of some cheap crap letting go/breaking under pressure scares me! Any recommendations? Laser, Draper etc?
__________________
D5, 205 Phase 3 V70...love the grunt. Previous: 2004 (2005 facelift) 2.4 170 |
Mar 11th, 2016, 18:54 | #2 |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
I've got the Laser ones from Halfords for I think £30.
Plenty good/strong enough for occasional use.
__________________
2002 S60 SE D5 Manual 209000 miles |
Mar 11th, 2016, 18:58 | #3 |
Master Member
Last Online: Nov 18th, 2023 21:06
Join Date: Jul 2009
Location: Glasgow
|
I have been using a set from machinemart that seem pretty good.
Paul
__________________
W reg S80 2.5D Auto SOLD; 55 reg V50 T5 AWD Manual SOLD; 59 reg S80 2.4D Geartonic SOLD; X reg V70 T5 Manual SOLD; 10 reg XC60 D5 Geartonic SOLD 65 reg V60 D4 R design Manual |
Mar 11th, 2016, 18:59 | #4 |
Member
Last Online: Feb 21st, 2023 23:44
Join Date: May 2009
Location: On a M-Way !
|
Laser, Sealey, Draper ... all OK ............ however, if its for the rear the Laser & Sealey will not fit as they are too long to clear the top spring seat and lower arm.
I used some very old Sykes that I had in the workshop and they just about did the job OK. Ideally something like this would be a better fit as it would probably clear the lower arm mount http://www.manomano.co.uk/mechanic-t...FcFsGwodNwcMJw The fronts should not be an issue with the strut off the car. |
Mar 11th, 2016, 19:03 | #5 |
Master Member
Last Online: Dec 15th, 2023 18:46
Join Date: Jan 2006
Location: Kent,pothole capital of UK.
|
I bought a set from eBay and they are very good and strong. Just to be on the safe side I used two sets on each spring. It helps compress the spring a lot squarer allowing you to locate the spring correctly when replacing and still only cost just over £20.
__________________
The secret of flight is to aim at the ground and miss ! Previous Volvos 740 GLE . V40 CD ,V70 2.4 SE LPT.V70 D5 P2. V70 D5 Se Lux P3. Current Jaguar XF Sportbrake but still like Volvos |
Mar 11th, 2016, 19:25 | #6 |
SilverBrick Lives!
Last Online: Apr 27th, 2024 22:18
Join Date: Apr 2015
Location: Poynton, Cheshire
|
I have the laser ones like they sell in Halfords, done me great service on Volvo 940s, Vauxhauls, not tried on any Volvo newer than the 940.
|
Mar 11th, 2016, 21:26 | #7 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
i have a set of these
http://www.ebay.co.uk/itm/Universal-...4AAOSweuxWRDIs and i have used them a several times now these are a damn sight better then normal spring compressor bars |
Mar 11th, 2016, 21:38 | #8 | |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
Quote:
__________________
2002 S60 SE D5 Manual 209000 miles |
|
Mar 11th, 2016, 21:46 | #9 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
to be honest i haven't tried on the rear of the s60. but i know there a lot better then the threaded bar and hook type compressors that i have had fail on me in the past
|
The Following 2 Users Say Thank You to Thanatos For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|