Breaking 1998 Celebration estate

[griston64]

Originally Posted by Shirtless

If they are Volvo genuine please sale them to me
P.s I tried to pm but since I joined yesterday I can’t on admins or something so if I want u can pm me

Do you still want mudflaps ?

[volvo always]

Originally Posted by volvo always

Did you manage to get round to trying to remove the Ac clamp?
If you can get it off, that would be much appreciated.
Many thanks. James.

Not sure if you replied, but did you have any luck in removing the AC condenser clamp? Its notched and fixes the 2 ac pipes to the condenser with a securing bolt in the centre. If you look under drivers side you will see the pipes leading to condenser and the clamp. The bolt may come out!

Many thanks. James

[griston64]

Originally Posted by wrinkles

The bulb holder for the rear ash tray light it just clips into the rear console panel above the ash tray Have you still got it please.

Is it a little metal clip ?

If it is I removed it today

Cheers

Mark

[wrinkles]

It must be as mine is missing the bulb holder has two spade terminals on it. It also lights the arm rest cubby hole as well

[griston64]

I'm a little confused. do you have the bulb there. Connected to wires but no little clip to hold bulb in place ?

[halfarsedhalfyard]

Is the brake and clutch pedal assembly available?

[wrinkles]

It is the complete fitting with the bulb holder that I need.I have the two wires with conectors on them but no fitting.

[Laird Scooby]

Originally Posted by wrinkles

It is the complete fitting with the bulb holder that I need.I have the two wires with conectors on them but no fitting.

Originally Posted by griston64

I'm a little confused. do you have the bulb there. Connected to wires but no little clip to hold bulb in place ?

I'm confused too Mark. On my 760 the ash tray illumination (on the front - i'm guessing we're still talking about the same thing?) the bulb is a replaceable one in a holder that has a bayonet fitting into the back of the upper centre console above the ash tray. If it's the rear one, i can't remember but could probably look later.

On the front one, the two wires connect to the holder with removable connectors (none of this "special Volvo bulb" stuff!), i'd hazard a guess the rear is the same but as i say, i could probably look later to see if i can help any.

[griston64]

Originally Posted by halfarsedhalfyard

Is the brake and clutch pedal assembly available?

Sorry but it's promised to somebody.

[griston64]

Originally Posted by wrinkles

It is the complete fitting with the bulb holder that I need.I have the two wires with conectors on them but no fitting.

In the breaker car there is just a connector for the bulb to fit into and a little metal clip