2.4D (2005 on) - injector connector

5cilinder · Sep 22nd, 2020, 18:48

How can the terminals be removed from the injector connector safely?
Just pulling?

Symes · Sep 26th, 2020, 07:42

Most electrical connectors have a small 'barb' on the metal contact part. Sometimes it's visible from the outside of the plastic bit, but often these days they are internally held. The former can be released with a pin but the internal ones need a really thin 'prodder'. To fit between the plastic and the metal contact from the end of the connector, the tools are available on eBay or Amazon.
Of course if the exit side wires have been sealed, replacement of the entire connector will probably be required.

5cilinder · Sep 27th, 2020, 05:31

I see what ur saying tried it already with a very thin screwdriver .But there is hardly any room to get it between ill try with some different tools thanks!

Sep 22nd, 2020, 18:48	#1
5cilinder Premier Member Last Online: Today 02:49 Join Date: Oct 2011 Location: Groningen	injector connector How can the terminals be removed from the injector connector safely? Just pulling?

Sep 26th, 2020, 07:42	#2
Symes Master Member Last Online: Apr 10th, 2024 03:33 Join Date: Oct 2001 Location: Andover, Hants	Most electrical connectors have a small 'barb' on the metal contact part. Sometimes it's visible from the outside of the plastic bit, but often these days they are internally held. The former can be released with a pin but the internal ones need a really thin 'prodder'. To fit between the plastic and the metal contact from the end of the connector, the tools are available on eBay or Amazon. Of course if the exit side wires have been sealed, replacement of the entire connector will probably be required. __________________ Previously held: 264GLE;S60 SE 2.0T;XC70 SE LUX D5 (163);V70 SE (170);V70 SE D5 (163) Currently held: XC90 SE LUX (MY12 200), XC70 SE D5 (MY06 185); V70 SE D5 (MY07 185)

Sep 27th, 2020, 05:31	#3
5cilinder Premier Member Last Online: Today 02:49 Join Date: Oct 2011 Location: Groningen	I see what ur saying tried it already with a very thin screwdriver .But there is hardly any room to get it between ill try with some different tools thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)