|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Clicking noise when turning rightViews : 587 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 23rd, 2020, 17:24 | #1 |
Member
Last Online: Jan 24th, 2022 07:43
Join Date: Feb 2011
Location: Arundel
|
Clicking noise when turning right
Hi,
Took the bus in for the wheel bearing to be replaced today and now this is fixed the garage have noticed a strange clicking noise when turning right. It's only when turning right and, if you turn the engine off whilst continuing to turn with the momentum the noise disappears. Turn the engine back on and the clicking starts again. Guessing this is most likely an engine issue? Any ideas? the garage have checked the normal issues for anything obvious but couldn't see anything! Nickd
__________________
2008 XC90 D5 Sport - 151k 2011 V70 SE - 75k - Sold 2001 V70 SE 2.4T - 122k - Sold |
Jun 23rd, 2020, 19:34 | #2 |
Me ? Surely Not!
Last Online: Apr 5th, 2024 16:23
Join Date: Jul 2010
Location: 2007 Volvo XC90 D5 Geartronic. South of Hadrians Wall.
|
That sounds like a CV joint to me and there will be a difference with the engine off as no driving force is being exerted on it.
Tie that in with the fact that is the very area that they have been working and it makes it all the more a probability.
__________________
“Do the right thing. It will gratify some people and astonish the rest.” – Mark Twain 😊 2007 Volvo XC90 D5 SE Geartronic |
The Following User Says Thank You to S60D5-185 For This Useful Post: |
Jun 24th, 2020, 00:25 | #3 |
Volvo Driver
Last Online: Yesterday 10:12
Join Date: Mar 2016
Location: Basingstoke
|
Is it possible the garage had to put some heat on the bearing area and this has damaged the CV joint??
Just a thought Cheers Dave |
Jun 24th, 2020, 01:12 | #4 |
Junior Member
Last Online: Apr 18th, 2024 03:06
Join Date: Aug 2018
Location: Brisbane
|
Or they hammered the axle end really hard to release it from the bearing, and damaged the CV.
Or the new bearing is bad, or the axle bolt not properly installed, but you normally only get one click from that. If it is going click-click-click as you turn, it's the CV. |
Jun 24th, 2020, 14:56 | #5 |
Member
Last Online: Jan 24th, 2022 07:43
Join Date: Feb 2011
Location: Arundel
|
Hi,
The wheel bearing was n/s and the noise comes from the O/S. Could they still be related?
__________________
2008 XC90 D5 Sport - 151k 2011 V70 SE - 75k - Sold 2001 V70 SE 2.4T - 122k - Sold |
Jun 24th, 2020, 16:40 | #6 |
Volvo Driver
Last Online: Yesterday 10:12
Join Date: Mar 2016
Location: Basingstoke
|
Hmmm - just a coincidence then???
Good luck Cheers Dave |
Jun 24th, 2020, 18:02 | #7 |
Master Member
Last Online: Today 20:16
Join Date: Dec 2016
Location: Southend on sea
|
Are you sure this is not simply a cracked and ring touching the abs sensor?
That's what caused mine. Simple to see if you lift front wheel and look at the teeth on abs ring as you turn wheel. It could be that play in the bearing allows touching when turning.. Just a thought. John l |
Jun 27th, 2020, 11:14 | #8 |
Member
Last Online: Jan 24th, 2022 07:43
Join Date: Feb 2011
Location: Arundel
|
Thanks for all the replies.
I’ve tried to record the noise and uploaded to YouTube https://youtu.be/jZ5G4w8pQXw Hope this helps...
__________________
2008 XC90 D5 Sport - 151k 2011 V70 SE - 75k - Sold 2001 V70 SE 2.4T - 122k - Sold |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|