|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Auto gear selector knob removalViews : 307 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 8th, 2021, 21:31 | #1 |
New Member
Last Online: Sep 11th, 2021 14:38
Join Date: Oct 2011
Location: Rochester
|
Auto gear selector knob removal
Hi everyone I am having trouble selecting gears or really more just getting it to come out of park, it is a 2006 xc90 auto diesel and it seems that the release catch under the knob is the problem once it is out of park I can select Drive or Reverse or even tiptronic without problem but it really is a problem I am forcing it out can someone tell me how I remove the knob itself because I cannot see how to remove it, and it feels like I will break something before long, many thanks Chris
|
Apr 8th, 2021, 22:06 | #2 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
I just did this job last week, so you are in luck!
1. Prise up the trim around the gear selector. 2. Release the gearstick boot from the stick (it is a ring with tabs - get a small screwdriver up inside to release it) 3. Pull the knob off (it is tight and will come off suddenly). If you don't release the boot, you will also pull the selector indicator panel up with it, strain the wires underneath and possibly ruin the interlock solenoid - ask me how I know. 4. Disassemble the mechanism in the knob (push out the hinge pin first). You will find the selector pin inside has broken away from its housing. Repair with epoxy and re-assemble.
__________________
Greg |
The Following User Says Thank You to gmonag For This Useful Post: |
Apr 9th, 2021, 10:02 | #3 |
Premier Member
Last Online: Feb 4th, 2024 19:04
Join Date: Dec 2009
Location: southampton
|
You can also remove the trim from the bottom of the boot by releasing the 4 tabs underneath and either pulling the boot up or the trim down.
|
The Following User Says Thank You to owenfackrell For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|