|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Front Suspension BoltsViews : 588 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 5th, 2016, 12:45 | #1 |
New Owner - 1800S
Last Online: Apr 8th, 2018 08:16
Join Date: Jul 2015
Location: Tonbridge
|
Front Suspension Bolts
I've mis-placed a box and whilst I would appreciate all your offers to help find it, what am really looking for is the bolt sizes which bolt the front suspension to the bodywork.
Was going to replace these with stainless steel but if anyone can advise on he sizes needed it would be most appreciated. Think there are 3 on either side. John |
Nov 5th, 2016, 13:52 | #2 | |
Master Member
Last Online: Jan 24th, 2022 17:08
Join Date: Nov 2008
Location: small village in the north of Germany
|
Quote:
Buy new crews, grease them and you will be lucky. Regards, Kay Last edited by mocambique-amazone; Nov 5th, 2016 at 13:53. Reason: not my nature languish |
|
Nov 6th, 2016, 15:11 | #3 |
Master Member
Last Online: Apr 18th, 2024 23:55
Join Date: May 2010
Location: wetherby
|
Go to BASTUCK on the internet. they will either send you or you can down load a catalogue . they have most the bolt sizes for suspension.
Mate NEVER EVER fit stainless to a stressed area, their sheer aint good. Go for high tensile every time. I have built & rallied cars and seen some interesting effects when stainless bolts have been fitted-- Gucci they may be but in IMHO....durable when under stress they aint !!!!
__________________
Clive "Lets turn up the juice and see what shakes loose" |
The Following User Says Thank You to CLIVERALLY For This Useful Post: |
Nov 6th, 2016, 22:04 | #4 |
New Owner - 1800S
Last Online: Apr 8th, 2018 08:16
Join Date: Jul 2015
Location: Tonbridge
|
Clive
Thanks have a Bustuck catalogue here will go through, noticed your has gone into winter hibernation. Hopefully going to spend my winter putting it all back together. |
Nov 6th, 2016, 23:34 | #5 |
Senior Member
Last Online: Apr 7th, 2024 20:25
Join Date: Jan 2010
Location: congleton
|
Hiya,
If you still want the bolt measurements let me know and I'll get them tomorrow. Dave |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|