Volvo 740 B230F parts needed

[Challo]

Hi all,

Looking for a front drivers seat belt, and the pipe work between the MAF and the throttle body.

Anyone breaking a 740 with these parts?

Thanks

[360beast]

Have you got a photo of the part you need?

[Challo]

Originally Posted by 360beast

Have you got a photo of the part you need?

The seat belt is the standard one from the drivers side.

The pipe work I will grab a photo tomorrow.

[360beast]

Originally Posted by Challo

The seat belt is the standard one from the drivers side.

The pipe work I will grab a photo tomorrow.

Yeah it is just the pipe a need a photo of to see if it is the same as a 940 B200F.

[Laird Scooby]

Originally Posted by 360beast

Yeah it is just the pipe a need a photo of to see if it is the same as a 940 B200F.

I think this is the hose in question Luke :



Photo borrowed from Chris' other thread (Bringing a 740 back to life) so should be either the correct hose or likely he needs that one too!

Talking of seat belts, are 940 belts longer than 760 belts, particularly the drivers one?

[bob12]

Depending on the age of your 740 the seatbelt design/fiirings changed a couple or more times during the production run.

Bob

[Challo]

Sorry for the delay.

I have attached the 2 pictures of the hose I need for the engine.

Its the main hose which runs from the MAF sensor into the engine. There are also 2 hoses which branch off which I need as well. it appears they are quiet brittle and there is a hole which someone has bodged with some black sticky glue.

[Challo]

Originally Posted by bob12

Depending on the age of your 740 the seatbelt design/fiirings changed a couple or more times during the production run.

Bob

I have just bought this from Ebay so hopefully its the right one.

https://www.ebay.co.uk/itm/Volvo-740...53.m1438.l2649

[Laird Scooby]

Originally Posted by Challo

I have just bought this from Ebay so hopefully its the right one.

https://www.ebay.co.uk/itm/Volvo-740...53.m1438.l2649

Check the width of the tongue on your existing seat belt Chris, it will be either 22 or 25mm. If it's 25mm and the new one is 22mm, although it will fit in the buckle it will be loose and sloppy and probably fail the MoT.

Obviously if yours is 22mm and that's 25mm, it won't go in.

Wise to check the new one on arrival so you don't go to the trouble of removing the seat and B pillar trim to change it only to find it won't fit once installed!

[360beast]

Originally Posted by Challo

Sorry for the delay.

I have attached the 2 pictures of the hose I need for the engine.

Its the main hose which runs from the MAF sensor into the engine. There are also 2 hoses which branch off which I need as well. it appears they are quiet brittle and there is a hole which someone has bodged with some black sticky glue.

Pretty sure that is the exact same as the 1991 940 B200F I will try and check tonight if not it will be Wednesday.