|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
screw typeViews : 931 Replies : 16Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 28th, 2017, 22:42 | #11 |
Premier Member
Last Online: Apr 22nd, 2024 19:39
Join Date: Jan 2006
Location: Falmouth
|
Measure it and I'll send you some for nowt.
__________________
Falmouth, Cornwall. 1970 California white 131. |
Nov 29th, 2017, 08:55 | #12 |
arcturus
Last Online: Today 07:31
Join Date: Mar 2006
Location: Sagres Portugal
|
Hi Santa. Very kind of you.I will pem you.
__________________
life's too short to drink bad wine |
Nov 29th, 2017, 10:33 | #13 |
arcturus
Last Online: Today 07:31
Join Date: Mar 2006
Location: Sagres Portugal
|
Needs to be about 3 cm. long
__________________
life's too short to drink bad wine |
Nov 29th, 2017, 13:48 | #14 |
VOC Member
Last Online: Yesterday 14:24
Join Date: Jul 2006
Location: Chatham
|
Where is this screw used? Might be able to find you a part number with exact details of measurements etc.
|
Nov 29th, 2017, 14:10 | #15 |
arcturus
Last Online: Today 07:31
Join Date: Mar 2006
Location: Sagres Portugal
|
it goes from inside the front wing into the clips on the inside of the grill. Will take a photo
OK. four screws one each corner into "U nuts" I have two at the moment +two temp' wood screws. http://www.vp-autoparts.com/main.asp...e&artno=276463
__________________
life's too short to drink bad wine Last edited by arcturus; Nov 29th, 2017 at 14:43. |
Nov 29th, 2017, 22:39 | #16 |
VOC Member
Last Online: Yesterday 14:24
Join Date: Jul 2006
Location: Chatham
|
The one indicated by the red arrow on the VP parts book drawing is actually the threaded stud on the inside of the grille surround. This uses the nut/lock washer/ plain washer shown next to it. The screw #955137 isn't in the fastener book so can't help you there. The actual one is shown on the drawing above the centre of the grille and would be #33 but that's missing here. Lists 7 as being used so there is probably 3 down each side and one in the centre underneath?
Using stainless is good here as new generic ones usually have poor plating and rust easily. The Volvo ones would have a dull galvanised finish. |
Nov 30th, 2017, 08:57 | #17 |
arcturus
Last Online: Today 07:31
Join Date: Mar 2006
Location: Sagres Portugal
|
Hi Derek. It's a replacement surround. The original ones probably had the stud. my one had the U bolts and screws.
__________________
life's too short to drink bad wine |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|