|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Can I replace the D bushes on the rear anti-roll bar?Views : 354 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 21st, 2018, 20:06 | #1 |
New Member
Last Online: Jul 21st, 2018 20:23
Join Date: Jul 2018
Location: Crook
|
Can I replace the D bushes on the rear anti-roll bar?
I have been told that I've got to buy the whole thing - or can I replace just the D bushes?
|
Jul 22nd, 2018, 18:17 | #2 |
Premier Member
Last Online: Jan 3rd, 2024 14:43
Join Date: Feb 2012
Location: Toronto Canada
|
I was stuck doing this repair. I looked around and regretfully came to the conclusion that you have to replace the whole thing. Bit of a pain and relatively expensive. I was able to do the job without taking the shocks or springs out though (that’s what VidA says is required). Instead I popt d to carefully remove the inner bolt on each control arm. This allowed me to drop them down towards the middle of the vehicle and gave me just enough room for removal.
__________________
2003 V40 1.9T B4204T4, 197,000miles (sold but alive!), 2004 S60 2.5T, 160,000miles, 2010 V70 3.2, 125,000miles, 2002 V70XC 2.4, 175,000miles Click here for my x40 and V70 P3 repair guides Last edited by pierremcalpine; Jul 22nd, 2018 at 18:20. |
Jul 23rd, 2018, 09:44 | #3 |
jasmith44
Last Online: Yesterday 15:19
Join Date: Nov 2007
Location: burnley
|
I take it that you didn't like the answer on your first post.yes it can be done as brendon w. Says.
__________________
244 / 460 / 440 /850x2/ s40x2 / s80 / s60 2.0t/ S60 ES T3. Current 2008 S80 2.5 SE T A. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|