|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
EGR mixer cleaned & blanked, now getting "sootfilter full"Views : 863 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 27th, 2011, 19:15 | #1 |
Senior Member
Last Online: Oct 19th, 2013 20:42
Join Date: Jun 2009
Location: Warminster, Wiltshire.
|
EGR mixer cleaned & blanked, now getting "sootfilter full"
Did mine this afternoon and it was lined with oil but not too bad. Cleaned the top hose and the mixer tube but couldn't get to the bottom hose jubilee clip so left that.
I did blank off the mixer where the mixer fixes to the EGR valve and immediately go "sootfilter full", so is it ok to just ignore it?. Not had a problem before so its directly related to me blocking the mixer off. Either way the gunk has gone. Blanked off this bit with a metal disk: Last edited by Speedy; May 27th, 2011 at 20:25. |
The Following User Says Thank You to Speedy For This Useful Post: |
May 28th, 2011, 00:06 | #2 |
Junior Member
|
Interested to hear the outcome of this ad I was about to do mine.
|
May 28th, 2011, 08:59 | #3 | |
Experienced Member
Last Online: Today 00:05
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
May 28th, 2011, 11:22 | #4 |
Senior Member
Last Online: Oct 19th, 2013 20:42
Join Date: Jun 2009
Location: Warminster, Wiltshire.
|
I have just taken out the blanking disc by just slightly releasing the 3 bolts and it fell out. Retightened the bolts and started the engine and no warnings, so I'm going to leave as intended, although cleaning out the mixer and hoses is a must and I'll do it annually.
Mines a S60 D5 163 on a 55 plate with FVSH, so even with a good service history it still worth doing....... Steve. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|