Major clearout

[940_Turbo]

I'm going to have a majopr clearout of stuff. Fed up with tripping over 30 years worth of parts. I have all sorts from B16 onwards.

B16 oil pump repair kit, factory new.

Big ends mains and camshaft bearings, various sizes. Volvo and Vandervell

Set of Mahle B16 oversize pistons

120 steering wheel shrouds, no cracks.

I'l update as I find stuff.

[classicswede]

If you can let me know what B16 parts you have (with prices if poss) that would be great.

Gathering parts for my B16 amazon project.

[940_Turbo]

Originally Posted by classicswede

If you can let me know what B16 parts you have (with prices if poss) that would be great.

Gathering parts for my B16 amazon project.

I'll have a hunt. I also have a rebuilt B16 bottom end. It'll need stripping as it's been sitting without a head, but I drove the car it was in and it ran fine.

[222s]

If your Amazon estate dog guard (that we discussed a while back) is also going to be up for sale, I'd like to buy that!

I'm also looking for the following parts:

Factory supplied jack, straight & in good working order.
Dashboard ashtray in good order - internal condition important, colour of exterior face doesn't matter.
Driver's door trim for 4dr / estate in the red that always fades to pink.
123GT under bumper L brackets for supporting the spotlamps
123GT front seat recliner bolts - just the ones that hold the recliner mechanisms to the seat frame (I already have the ones that hold the backrest). Ideally a full car set!

Thanks

[Tom7]

Hello!

If you have any of the following suitable for a '69 131 I would be very interested:

Rubber floor mats
Front grille panel and grilles (not fussy about which grilles as I think the earlier ones are nicer!)
Blue interior parts; front seat covers and rear seat base and back
Front wing chrome trims and O/S 2 door trim
Washer bottle and pump with 671723 on it. Its the square type with a folded metal bracket.
I would also be interested in some B20 engine parts needed for a rebuild. So if you have any valves, valve guides, ring sets they would be useful. I just need to work out what sizes I need!

Many thanks Tom

[tom-madbiker]

have you got a radiator in reasonable nick ie no leaks cos when i ran mine up it keeps springing leaks also two spacers for behind the winder handles and a door lock button

[940_Turbo]

Originally Posted by 222s

If your Amazon estate dog guard (that we discussed a while back) is also going to be up for sale, I'd like to buy that!

I'm also looking for the following parts:

Factory supplied jack, straight & in good working order.
Dashboard ashtray in good order - internal condition important, colour of exterior face doesn't matter.
Driver's door trim for 4dr / estate in the red that always fades to pink.
123GT under bumper L brackets for supporting the spotlamps
123GT front seat recliner bolts - just the ones that hold the recliner mechanisms to the seat frame (I already have the ones that hold the backrest). Ideally a full car set!


Thanks

I've got a jack, should have an ashtray. I make the brackets out of a bit of angle iron. Don't have pink trim, I hate it and never keep it;-)

Originally Posted by Tom7

Hello!

If you have any of the following suitable for a '69 131 I would be very interested:

Rubber floor mats
Front grille panel and grilles (not fussy about which grilles as I think the earlier ones are nicer!)
Blue interior parts; front seat covers and rear seat base and back
Front wing chrome trims and O/S 2 door trim
Washer bottle and pump with 671723 on it. Its the square type with a folded metal bracket.
I would also be interested in some B20 engine parts needed for a rebuild. So if you have any valves, valve guides, ring sets they would be useful. I just need to work out what sizes I need!

Many thanks Tom

I'l have a hunt tomorrow, I doubt I have the late trim. It's always rotten.

Originally Posted by tom-madbiker

have you got a radiator in reasonable nick ie no leaks cos when i ran mine up it keeps springing leaks also two spacers for behind the winder handles and a door lock button

I don't have a rad, about 30 of them got swiped out of the lockup recently, and presumably sold for scrap. I'll dig out some spacers and a lock button tomorrow.

[swedishandgerman]

Do you have any distributors?

[940_Turbo]

Originally Posted by swedishandgerman

Do you have any distributors?

I should think so.

[swedishandgerman]

What I'm specifically after is an 078 distributor or an 077

All the best
Adam