Limited slip differential (LSD) - Page 2

DunkinBiskits · Jan 24th, 2018, 20:40

if you want a half hearted LSD get a Quaife

if you want an actual LSD that works get a plate style (Gripper or WaveTrac)

Quaifes have a **** torque bias (about 2.1:1)

WaveTrac and Gripper have about 4.5:1 which can be made greater with its setup arrangement

StatusRed · Jan 24th, 2018, 21:56

I read up about the ATB Quaife and to me it sounded exactly like what the car already has (DSTC)?

alanoconnor · May 14th, 2018, 11:45

I'm looking at a Gripper plate at the moment. As I will be replacing the clutch it makes a lot of sense to fit one at the same time. They are expensive but it should cut down on the labour time.

Jan 24th, 2018, 20:40	#11
DunkinBiskits Master Member Last Online: Jan 1st, 2024 13:30 Join Date: Nov 2016 Location: Merseyside	if you want a half hearted LSD get a Quaife if you want an actual LSD that works get a plate style (Gripper or WaveTrac) Quaifes have a **** torque bias (about 2.1:1) WaveTrac and Gripper have about 4.5:1 which can be made greater with its setup arrangement __________________ https://www.facebook.com/VolvoComposites/ Horsepower is how fast you hit the wall Torque is how far you take the wall with you

Jan 24th, 2018, 21:56	#12
StatusRed Premier Member Last Online: Yesterday 19:28 Join Date: Jul 2015 Location: Glasgow	I read up about the ATB Quaife and to me it sounded exactly like what the car already has (DSTC)? __________________ 2009 S40 SE Lux 2.0i \| 2022 Suzuki V-Strom 650 \| 2002 Audi TT 225 Previous: C70 Coupe 2.4i \| Saab 9-5 Aero \| Daihatsu SporTrak

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 14th, 2018, 11:45	#13
alanoconnor Member Last Online: Jul 11th, 2022 17:57 Join Date: Apr 2016 Location: Cornwall, near Hayle View Photos By: alanoconnor	I'm looking at a Gripper plate at the moment. As I will be replacing the clutch it makes a lot of sense to fit one at the same time. They are expensive but it should cut down on the labour time.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)