|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
240 b230fk swap no sparkViews : 550 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 1st, 2019, 09:52 | #1 |
Volvo bandit
Last Online: Nov 4th, 2019 20:45
Join Date: Nov 2017
Location: Oxfordshire
|
240 b230fk swap no spark
Need some advice please,
Done the b230fk swap in my 240 (1997 940 to 1990 240) had a loom made to suit k-jet to LH 2.4. I’ve taken the dizzy out the back of the block and moved it to the front. This has been set up. The rotor arm is new and turning freely. Am getting no spark tho until you stop cranking (this is only a small spark) any idea’s? Would the cps be shot?
__________________
240 estate with Borbet A wheels, coilovers,front bucket seats, nardi wood wheel, turbo power now!! 1976 Harley shovelhead kicker only 1985 Harley evo |
Feb 7th, 2019, 07:39 | #2 |
Master Member
Last Online: Jan 24th, 2022 17:08
Join Date: Nov 2008
Location: small village in the north of Germany
|
Nobody did answer till now?
Simple stupid answer: Your car is with the wrong ignition switch. You have to swap the switch too. Have a look to a switch from a LH2.4 too at the scrapyard. Next problem: Do you use the ECU from the donor car too? 1997??? If yes, this will be with immobiliser and you won't the car get running without a "trick" There is no known way to bypass the separate immobiliser box Good luck, one of the best enginesolution you do. The M90 combination with hammering of the tunnel or do you use the M46? Good luck, Kay Last edited by mocambique-amazone; Feb 7th, 2019 at 07:42. |
Feb 7th, 2019, 07:42 | #3 |
Master Member
Last Online: Jan 24th, 2022 17:08
Join Date: Nov 2008
Location: small village in the north of Germany
|
I'm on a journey now, without access to my data's. I will have a look into this thread regularly. Specific informations if needed I'm able to give from Monday on. Please post the number of the ECU and EZK (ICU)
|
Feb 7th, 2019, 09:54 | #4 |
Master Member
Last Online: Today 13:54
Join Date: Nov 2012
Location: London and Cambridge
|
You don’t need to swap the ignition switch- I swapped my car and it has the original switch.
Chips for the ecu and ezk disable the immobiliser function - as well as higher rev limit, richer fuel map etc. Cheers |
Feb 7th, 2019, 18:13 | #5 |
Premier Member
Last Online: May 10th, 2022 21:01
Join Date: May 2009
Location: Wiltshire
|
He has got the car running, there were a couple of wires that needed connecting and I supplied the required chip to get around the immobiliser.
__________________
1983 244 |
The Following 2 Users Say Thank You to martin_r_smith For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|