|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Defective CEM/CDM message on vidaViews : 968 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 14th, 2019, 20:57 | #1 |
Junior Member
Last Online: Apr 23rd, 2024 21:50
Join Date: Jul 2009
Location: dundee
|
Defective CEM/CDM message on vida
Hi,
I am trying to read the fault codes using vida/dice, however vida is not reading anything from the car. I used it last weekend to clear a fault, so i could see if it would came back and then i could read the latest code. The red warning reappeared two days later, but now it will not recognise the car in vida and i get the disconnected message in right display box, where battery voltage is. All lights are funtioning on dice unit and vida is also recognising it. The message is- Not possible to read out information from the vehicle. No response from vehicle. Possible causes are ignition not on, vehicle is older model year 1999, defective CEM/CDM. Any advice would be appreciated. |
Dec 14th, 2019, 20:59 | #2 | |
Experienced Member
Last Online: Today 16:48
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
Dec 14th, 2019, 21:31 | #3 |
Junior Member
Last Online: Apr 23rd, 2024 21:50
Join Date: Jul 2009
Location: dundee
|
Even if the car is running?
|
Dec 14th, 2019, 21:50 | #4 |
Experienced Member
Last Online: Today 16:48
Join Date: Jun 2007
Location: L/H side
|
__________________
My comments are only based on my opinions and vast experience . |
Dec 14th, 2019, 21:54 | #5 |
Junior Member
Last Online: Apr 23rd, 2024 21:50
Join Date: Jul 2009
Location: dundee
|
I always have the car started when using vida, just dont why it wont connect.
|
Dec 14th, 2019, 22:03 | #6 |
Junior Member
Last Online: Apr 23rd, 2024 21:50
Join Date: Jul 2009
Location: dundee
|
I also plugged in my elm327 obd2 reader and it works, but still the same issue with vida/dice
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|