|
Information |
|
Complete 1993 240 Wiring Loom LH2.4Views : 531 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 24th, 2014, 17:28 | #1 |
Turbobricker
Last Online: Apr 14th, 2024 18:09
Join Date: Dec 2002
Location: Wellingborough
|
Complete 1993 240 Wiring Loom LH2.4
I removed this complete loom from a late 1993 240 estate that i broke a few years back.
The intention with it was to completely replace the wiring in a 240GLT that was going to be turbo'd. In the end the 240 GLT was too rotten and a late already LH2.4 car was sourced to carry out the conversion, so this was needed. So if you've got a GLT that you want to convert to turbo, and your not that keen on making your own LH2.4 Loom up, or spending hours removing a LH2.4 loom from a 240, to then cut up and make a standalone LH2.4 loom then this is the part for you. It is complete in that every wire from the headlights, horn, washer etc, through the engine bay, includes kidney plate, fusebox, wires to heater, dash etc, wiring to rear lights etc. Can give new owner copies of 1993 wiring green book to help with install. There is not the indiviual wiring looms for each door, but you'd just plug your exsisting door wiring into this late loom. £100 Collected, or i can bring to BKV Looks like below. Last edited by Chesh740R; Jun 24th, 2014 at 19:09. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|