|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
DIM Temperature readingViews : 629 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 23rd, 2007, 08:38 | #1 |
Gareth
|
DIM Temperature reading
Hi All,
My DIM temperature display seems to have taken on a personality. It's not reading correctly. At some point, it will just start falling to a very low temperature, usually 10-15 degrees below what it should and then it returns to normal. If when it's falling, I turn the ignition off and then back on, when the display becomes live it shows it's final low temperature... if I do the same thing when it's rising, it comes back on at the correct temperature. My thoughts were a loose wire or some water in the circuit somewhere. Would that sound about right?
__________________
|
Jun 23rd, 2007, 12:56 | #2 |
Gareth
|
Additional: Assuming that it is the sensor in some way, how do I get in to the mirror unit to remove/fit it without braking anything?
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|