|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
Fuel Economy Gauge installation helpViews : 1375 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 10th, 2009, 16:54 | #1 |
I've Been Banned
Last Online: Jul 4th, 2016 12:45
Join Date: Jan 2009
Location: Birmingham
|
Fuel Economy Gauge installation help
Hi, some time back now I purchased a fuel economy gauge for my Volvo. It arrived without any instructions on installing it!!!
Does anyone know how? Regards, Peter |
Apr 10th, 2009, 18:23 | #2 |
240 Turbo
|
It should have a + (red) and a - (black) for the backlight, connect the red up to the red wire leading to your clock bulb, connect the black wire to earth point on metal centre console chassis (there should be a common earth point with a bunch of other wires to it)
take a blanking plug out of one of the hole in your inlet manifold (11mm spanner) and install a nipple (from scrapyard volvo) in the hole. Connect a length of 2.5m x 3mm fuel line (from motor factors) or silicone or nylon line to the nipple and feed it though a hole in the bulkhead, later models have a piece of corrugated shroud fitted near the passenger side bonnet hinge for wires and pipes, connect line to back of gauge. Hey presto!
__________________
1991 240 Turbo GL 1992 940 GL 1996 940 GLE Turbo Auto 1985 Bedford CF2 B230E |
Apr 10th, 2009, 18:27 | #3 |
Master Member
Last Online: Mar 27th, 2024 22:09
Join Date: Dec 2001
Location: OBAN
|
If it the genuine Volvo gauge, (round type, with a small petrol pump in right hand side and a section going from to clear to red), you will need to take the pressure from the inlet manifold with a threaded connector, remove the small 11 mm bolt from the top, taking a hose from there to the rear of the gauge, the illumination is straightforward, + and - to the dashboard lighting circuit.
Hope this makes sense and helps. Cheers, Kevin. Suterman just got his reply in front of me !!! Last edited by kev240; Apr 10th, 2009 at 18:28. Reason: updated info. |
Apr 15th, 2009, 20:42 | #4 |
I've Been Banned
Last Online: Jul 4th, 2016 12:45
Join Date: Jan 2009
Location: Birmingham
|
Thanks for the advice guys...I'll give it a go and let you know how I get on.
Regards |
Apr 17th, 2009, 20:23 | #5 |
Master Member
Last Online: Aug 22nd, 2022 17:32
Join Date: Jun 2006
Location: Derby
|
Hi 262
Prepare for counselling - these things can send you mad! Your driving will never be the same again. Good luck Phil |
Apr 20th, 2009, 17:22 | #6 |
Master Member
Last Online: Jan 30th, 2019 22:56
Join Date: Nov 2004
Location: Heathfield, East Sussex
|
This company has a host of parts for this job:
http://www.speedograph-richfield.com...pipelines.html |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|