S40 Leather interior - Page 2

fearlesspierre · Feb 22nd, 2013, 13:29

More pics Gatos...

Door card

Passenger side from inside vehicle

Hope that helps mate

gatos · Feb 22nd, 2013, 13:32

Still not 100% sure. My guess is that you have P1 seats. Your door cards are definitely P1. The mountings are the same for both P1 and P2, but the electrical connectors under the seat differ. Check under your seat and if possible take a few photos.

This is what what P2 connectors look like

fearlesspierre · Feb 22nd, 2013, 13:52

OK mate here goes...

From behind the seat:

From the front of the seat:

The connectors seem to be the same or similar colours

gatos · Feb 22nd, 2013, 14:00

That is interesting. You have a P2 SIPS connector which is the good part. Not sure about the other bits. Can't tell.. Does your car have heated seats?

In the second photo, is grey connector at the left a flat connector for the heated seats?

fearlesspierre · Feb 22nd, 2013, 14:03

Quote:

Originally Posted by gatos

That is interesting. You have a P2 SIPS connector which is the good part. Not sure about the other bits. Can't tell.. Does your car have heated seats?

In the second photo, is grey connector at the left a flat connector for the heated seats?

No mate, no heated seats here!

gatos · Feb 22nd, 2013, 14:15

Check that connector of yours on the left. If it looks the same as this one, then the electrics are the same and you will be able to fit the seats. You will hyave to look for alternative door cards though....

fearlesspierre · Feb 22nd, 2013, 14:17

Off to work now buddy. Crappy late shift on the buses. Will take a look tomorrow and get back to you.

fearlesspierre · Feb 23rd, 2013, 10:19

OK, been out with the camera again this morning, this time I lifted the seat right up

yes i should've done that yesterday but I can be a bit dim...

These from the front of the seat:

Now from the rear of the seat:

I'm a bit reticent to unplug any of the connectors for fear of getting an airbag in the face from the seat, hope that helps Gatos.

gatos · Feb 23rd, 2013, 17:11

They should be fine then.....All the connectors look the same. Will try to get some photos of the seats tomorrow.

Good thing you didn't unplug the connectors as you would trigger the SRS light on your speedo.

fearlesspierre · Feb 24th, 2013, 00:38

Thank gawd I didn't do that then! Pics would be great, I can bring a trailer next week to get the seats home to Woodham. You wouldn't happen to have a centre console with arm rest too??

Feb 22nd, 2013, 13:29	#11
fearlesspierre Junior Member Last Online: Apr 15th, 2013 21:47 Join Date: May 2010 Location: Chelmsford	More pics Gatos... Door card Passenger side from inside vehicle Hope that helps mate __________________ *Pete H* Feb' 2000 S40 1.8i XS auto P1.5 79k miles Jan' 2000 Ford Mondeo Mk2 GhiaX V6 2.5 manual 42k miles.

Feb 22nd, 2013, 13:32	#12
gatos Premier Member Last Online: Nov 15th, 2022 21:34 Join Date: Apr 2010 Location: London / Essex	Still not 100% sure. My guess is that you have P1 seats. Your door cards are definitely P1. The mountings are the same for both P1 and P2, but the electrical connectors under the seat differ. Check under your seat and if possible take a few photos. This is what what P2 connectors look like __________________ Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba

Feb 22nd, 2013, 13:52	#13
fearlesspierre Junior Member Last Online: Apr 15th, 2013 21:47 Join Date: May 2010 Location: Chelmsford	OK mate here goes... From behind the seat: From the front of the seat: The connectors seem to be the same or similar colours __________________ *Pete H* Feb' 2000 S40 1.8i XS auto P1.5 79k miles Jan' 2000 Ford Mondeo Mk2 GhiaX V6 2.5 manual 42k miles.

Feb 22nd, 2013, 14:00	#14
gatos Premier Member Last Online: Nov 15th, 2022 21:34 Join Date: Apr 2010 Location: London / Essex	That is interesting. You have a P2 SIPS connector which is the good part. Not sure about the other bits. Can't tell.. Does your car have heated seats? In the second photo, is grey connector at the left a flat connector for the heated seats? __________________ Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba

Feb 22nd, 2013, 14:17	#17
fearlesspierre Junior Member Last Online: Apr 15th, 2013 21:47 Join Date: May 2010 Location: Chelmsford	Off to work now buddy. Crappy late shift on the buses. Will take a look tomorrow and get back to you. __________________ *Pete H* Feb' 2000 S40 1.8i XS auto P1.5 79k miles Jan' 2000 Ford Mondeo Mk2 GhiaX V6 2.5 manual 42k miles.

Feb 23rd, 2013, 10:19	#18
fearlesspierre Junior Member Last Online: Apr 15th, 2013 21:47 Join Date: May 2010 Location: Chelmsford	OK, been out with the camera again this morning, this time I lifted the seat right up yes i should've done that yesterday but I can be a bit dim... These from the front of the seat: Now from the rear of the seat: I'm a bit reticent to unplug any of the connectors for fear of getting an airbag in the face from the seat, hope that helps Gatos. __________________ *Pete H* Feb' 2000 S40 1.8i XS auto P1.5 79k miles Jan' 2000 Ford Mondeo Mk2 GhiaX V6 2.5 manual 42k miles.

Feb 23rd, 2013, 17:11	#19
gatos Premier Member Last Online: Nov 15th, 2022 21:34 Join Date: Apr 2010 Location: London / Essex	They should be fine then.....All the connectors look the same. Will try to get some photos of the seats tomorrow. Good thing you didn't unplug the connectors as you would trigger the SRS light on your speedo. __________________ Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba

Feb 24th, 2013, 00:38	#20
fearlesspierre Junior Member Last Online: Apr 15th, 2013 21:47 Join Date: May 2010 Location: Chelmsford	Thank gawd I didn't do that then! Pics would be great, I can bring a trailer next week to get the seats home to Woodham. You wouldn't happen to have a centre console with arm rest too?? __________________ *Pete H* Feb' 2000 S40 1.8i XS auto P1.5 79k miles Jan' 2000 Ford Mondeo Mk2 GhiaX V6 2.5 manual 42k miles.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)